Milwaukee® 49-57-0010 Arbor Assembly, #3 Shank, For Use With 4292-1 and 4297-1 Magnetic Drill Motor
Steel Hawg® arbor with No. 3 Morse taper shank for use in Milwaukee magnetic drill motors (models 4292-1 and 4297-1). This arbor adapts threaded Steel Hawg® cutters to a no. 3 internal Morse taper motor. For best cutting results use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately to distribute cutting fluid during drilling.
-
BrandMilwaukee®
-
UPC045242201006
-
Manufacturer Part Number49-57-0010
-
CountryUSA|Canada
-
MaterialSteel
-
Shank Size#3
-
Suitable For Use With4292-1 and 4297-1 Magnetic Drill Motor
- Arbor assembly for threaded shank Steel Hawg cutters
- Steel Hawg Arbor with Number 3 Morse taper shank for use in Milwaukee magnetic drill motors 4292-1 or 4297-1
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 4AK77 |
-
Alternative Part Number8596144
-
UNSPSC27112811
-
IDEA Index ID8596144
-
Package DescriptionEACH
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 49-57-0010 Arbor Assembly, #3 Shank, For Use With 4292-1 and 4297-1 Magnetic Drill Motor
Steel Hawg® arbor with No. 3 Morse taper shank for use in Milwaukee magnetic drill motors (models 4292-1 and 4297-1). This arbor adapts threaded Steel Hawg® cutters to a no. 3 internal Morse taper motor. For best cutting results use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately to distribute cutting fluid during drilling.
CF-1/2-NS MCGILL/EMERSON POWER TRANSMISSION PRODUCTS
1/2"-OD STUD CAM FOLLOWERS-MCGCF1/2NS>
Gates® Power Transmission Super HC® Molded Notch PowerBand® 5/3VX800 Heavy Duty Molded Notch V-Belt, 3VX Section, 3/8 in W Top, 80 in L Outside, 21/64 in THK, EPDM
When your power transmission application needs a high horsepower solution but is constrained by drive weight or physical space, the answer is Super HC™ Molded Notch belts. Our proprietary ethylene construction process provides a superior combination of flex and load-carrying capacity, transmitting up to three times the horsepower versus comparably sized belts. Super HC MN V-belts put more power where high speeds, high speed ratios or small pulley diameters are required, offering significant benefits over classical section V-belts.
Synchronous belt drives help reduce the problems of slippage, belt stretch, lubrication and metal to metal contact. They provide superior performance because power is transmitted by positive engagement of belt teeth rather than by friction, as in conventional belt drives.
15-GAL YELLOW COMPAC FLAMMABLE SAFETY CABINET - JUS25315>
Browning® cast iron bevel and spiral bevel gear reducers are constructed of rugged cast iron housings. These housings are line bored for precise gear and bearing alignment. To offer maximum performance, these reducers are designed with tapered roller and ball bearings. Browning® cast iron bevel and spiral bevel gear reducers are available in six sizes and ratios. These range from 1:1 to 3:1, with speed-up ratios available. Torque capacity ranges from 99 to 5942 in-lb.
