Milwaukee® 49-57-0814 Tang Drive Annular Cutter, 13/16 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 13/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
-
BrandMilwaukee®
-
UPC045242201471
-
Manufacturer Part Number49-57-0814
-
CountryUSA|Canada
-
FinishUncoated
-
MaterialCarbide
-
TypeQuick-Change Tang Drive
-
Applicable MaterialsAluminum, Cast Iron, Metal, Mild Steel and Stainless Steel
-
Cutter Diameter13/16 in
-
Cutting Depth1 in
-
Shank Size3/4 in
-
Cutting Edge MaterialCarbide
-
Shank TypeQuick-Change
- Long life, Abrasion-resistant carbide teeth increase cutter life and produce a cleaner cut
- Quick change tang drive, Fast change-outs let you work more efficiently
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 48Z574 |
-
Alternative Part Number8596440
-
UNSPSC27112826
-
IDEA Index ID8596440
-
Package DescriptionEACH
-
Standards/ApprovalsOSHA Compliant|UL Listed
-
WarrantyNo Warranty
Recently Viewed
Milwaukee® 49-57-0814 Tang Drive Annular Cutter, 13/16 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 13/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
#6X1-1/4" GALVANIZED DECK CAPSCREW-JWH707236 >
Crescent® PS6549C Pro Compound Action Long Nose Plier, Serrated Chrome Vanadium Steel Jaw, 1-9/16 in L x 1-9/32 in W Jaw, 9 in OAL
Increase your cutting power by 50% with the leverage-producing compound-action design of these Crescent Pro-Series 9-inch Long Nose Cutting Pliers. Made from chrome vanadium steel for increased durability, these pliers also have co-molded grips for added comfort and control.
Irwin® Hanson® 53405 534 EX-5 Spiral Flute Screw Extractor, #5 Extractor, 19/64 in Drill, For Screw Size: 3/8 to 5/8 in, 3/8 in NPT, 3/8 in BSP, 10 to 16 mm, 3-3/8 in OAL, 19/64 in Shank
IRWIN Spiral Flute Screw Extractors - 534/524 Series.
GEARWRENCH® 9615N Non-Capstop Open End Regular Length Reversible Combination Wrench, 15 mm Wrench, 12 Points, 15 deg Offset, 7.748 in OAL, High Alloy Steel, Polished Chrome
The reversible ratcheting combination wrenches from GEARWRENCH® are a staple for every tool box. The flush-mounted reversing lever allows the user to switch motion left to right without needing to remove the wrench from the fastener increasing productivity. The 15 deg offset on the ratcheting box end allows for greater knuckle clearance and safer access to the fasteners. The ratcheting box end is designed to need as little as 5 deg to move fasteners versus 30 deg for standard wrenches and features off-corner loading for a better grip on the fastener and reduces fastener rounding. The wrenches are made from strong alloy steel with a bright, full polish chrome finish.
20 ML CONCRETE REPAIR EPOXWYE IS DESIGNED TO ANCHOR REBAR, ALL-THREAD, ETC INTO CONCRETE. ALSO, FOR CONCRETE REPAIR-JWH277060 >
