Milwaukee Tool
Milwaukee 16-GAUGE ELECTRIC SHEAR DIES MWK 48-44-0270
This item is the replacement die for Milwaukee's 16 gauge nibbler model 6890. The replacement punch, 48-44-0260, is purchased separately. Must be used with plate wrench 49-96-4725 to remove the protective collar and 49-96-0330 2.5 mm wrench to remove the die.
Milwaukee 16-GA NIBBLER PUNCH/DIE SETS MWK 48-44-0272
The MILWAUKEE® M12 FUEL Punch and Die Set is to be used with the MILWAUKEE® M12 FUEL 16-Gauge Nibbler Bare Tool. The accessory punch and die is the portion of the tool that performs the cutting functionality and must be routinely replaced. This accessory is good for cutting thin sheet metal and corrugated materials.
Milwaukee 16-GA NIBBLER DIE HOLDER EXTENSION MWK 49-72-0152
The MILWAUKEE® M12 FUEL16 ga Nibbler Die Holder Extension is compatible with the MILWAUKEE® M12 FUEL 16-Gauge Nibbler Bare Tool. It is intended to be used for cutting deeper corrugated metal materials. This accessory is quick to assemble and can be changed without the need of an additional tool.
Milwaukee 15/16" X 6" FLAT BORING BITS MWK 48-27-0941
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee® 15/16 in. x 6 in. flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and Formica. This bit offers a 6 in. drilling depth but can be used with a 12 in. extension (48-28-3350) for extended deep-hole drilling.
Milwaukee 15/16" STEEL HAWG METAL CUTTERS MWK 49-57-0939
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 15/16 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
Milwaukee 15-PC 1/2"-DR IMPACT SOCKET SETS MWK 49-66-6802
MILWAUKEE® SHOCKWAVE Impact Duty™ Socket Set features the boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking enables you to select the right socket every time throughout the life of the socket. Engineered with high-strength forged steel for optimized performance in heavy-duty applications. The non-slip hex geometry prevents fastener rounding. The milwaukee dual-hole design and ring groove allow for easy socket attachment and removal. Sets can be kept organized in the included MILWAUKEE® PACKOUT™ Compact Organizer with a clear top for easy identification of parts at a glance. The Compact Organizer is part of MILWAUKEE® PACKOUT Modular Storage System, allowing for customization of storage systems to easily transport and organize tools and accessories. All Milwaukee SHOCKWAVE Impact Duty ™ Sockets and Extensions are backed by Milwaukee's Lifetime Guarantee and meet ASME industry standards.
Milwaukee 14" CHAINSAW GUIDE BARS MWK 49-16-2756
The MILWAUKEE® 14" 3/8" LOW PROFILE™ Pitch, .043" Gauge Guide Bar is made with lightweight material and is easy to maneuver for controlled cuts. The narrow kerf bar offers more cuts per charge versus standard kerf bars to help maximize battery efficiency. This bar is recommended for use with the M18 FUEL™ 14" Chainsaw (2727-20) and 14" 3/8" LOW PROFILE™ Pitch, .043" Gauge Saw Chain (49-16-2749) and fits chainsaws with an A041 tail mount & narrow kerf chains of the same pitch, gauge, length, and drive links.
Milwaukee 14.4-VOLT 1/2" IMPACT WRENCH MWK 9083-22
IMPACT WRENCH-MWK908322>
Milwaukee 14-PC 3/8"-DR MM IMPACT SOCKET SET MWK 49-66-7008
The MILWAUKEE® 14-Piece SHOCKWAVE Impact Duty™ 3/8 in. Drive Metric Deep 6 Point Socket Set features the boldest, longest-lasting markings and extreme impact durability in high torque applications. The stamped and ink-filled size marking makes selecting the right socket every time easy throughout the life of the socket. These Milwaukee sockets are engineered with high strength forged steel for optimized performance in heavy-duty applications. The non-slip hex geometry prevents fastener rounding, and a dual-hole design and ring groove allow for easy socket attachment and removal. The customizable Socket Rail comes with removeable end caps to add or take off socket clips for optimal storage. All SHOCKWAVE Impact Duty™ ™ Sockets backed by a Lifetime Guarantee and meet ASME industry standards.
Milwaukee 14-IN-1 RATCHET SCREWDRIVER KITS MWK 48-22-2903
The Milwaukee® 14-in-1 Ratcheting Multi-Bit Screwdriver is the most versatile multi-bit screwdriver. This multi-bit driver features easy-access in-handle storage which keeps bits organized, allowing you to quickly change bit sizes and types. The durable, all-metal ratchet allows for higher torque and faster driving. The removable bit holder has a 1/4" hex shank, making it power tool ready for maximum jobsite versatility. The chrome-plated bit holder provides rust protection and reduces wear from elements on the jobsite. The Milwaukee® 14-in-1 Ratcheting Multi-Bit Screwdriver is backed by Milwaukee’s Limited Lifetime Warranty.
Milwaukee 12V OR 14.4V CL WORKLIGHTS MWK 49-24-0155
12-VOLT OR 14.4-VOLT WORK LIGHTS-MWK49240155 >
Milwaukee 120"-LENGTH WHITE VACUUM HOSES MWK 49-90-0020
White 10 Ft. long canvas covered, wire reinforced, rubber lined 1-1/2 in. I.D. hose has two molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.
Milwaukee 120"-LENGTH VACUUM CLEANER HOSES MWK 49-90-0060
This 10 ft long crushproof multi-flex vinyl 1-1/2 in ID hose has no wire re-enforcement. Molded cuff ends fit into swivel end or compression fit connectors which are ordered separately.
Milwaukee 120" BLK CANVAS VACUUM HOSES MWK 49-90-0030
Black 10 Ft. long canvas covered, wire reinforced, rubber lined 1-1/2 in. I.D. hose has two molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.
Milwaukee 120" 16-2-S QK-LOCK TOOL CORD SETS MWK 48-76-5010
This Milwaukee Quik-Lok® cord is a two wire double insulated 10 Ft. cord for fast field replacement of a damaged cord. Made of premium grade hi-flex wire the cord is quickly removed and attached to Milwaukee Tool with the Quik-Lok® cord feature. To change a damaged cord simply turn the collar at the top of the cord counter clockwise to loosen the nut and pull down on the cord to remove.
Milwaukee 120' X 1/8" FISHTAPE REFILLS MWK 48-44-5176
The MILWAUKEE® M18 FUEL™ ANGLER™ 120' x 1/8" Steel Pulling Fish Tape Replacement Cartridge is part of the Powered Feed and Retract that eliminates manual operation for less user fatigue and automatically reels the tape back into the Replacement Cartridge for a cleaner jobsite. The steel fish tape puller has blue tempered steel tape for improved flexibility and durability with an anti-catch tip for continuous fishing. This ANGLER™ has the ability to pull wire through a 120' run with 360° degrees of bends and is compatible with any of Milwaukee's 3 Less Binding steel and non-conductive Replacement Cartridges to tackle any situation.
Milwaukee 120-VOLT GRINDER-USE "MWK" 6142-31
4-1/2" AUTO SHUT-OFF ELECTRIC GRINDERS-MWK614631>
Milwaukee 120-VOLT GRINDER-USE "MWK" 6142-30
The 11 A 4-1/2 in small angle grinder (paddle, lock-on) delivers upto 3X more durability and upto 50% more power than the competition. With a 1400 MWO motor that powers through the toughest jobs, the 6146-30 is the perfect match for industrial users. Milwaukee® electronic advantage includes overload protection to maximize motor life, an electronic clutch that extends tool life and helps prevent bind-up, line lock-out that prevents automatic start-up after power loss and soft start. Featuring a 100% tool-free design, this grinder allows the user to change all accessories, including hubbed product, without a wrench. In addition, the tool-free, burst resistant, adjustable guard allows users to make quick guard installations and adjustments.
Milwaukee 120-VOLT GRINDER-USE "MWK" 6141-31
4-1/2" NON-LOCK ANGLE ELECTRIC GRINDER-MWK614731 >
Milwaukee 120-VOLT GRINDER-USE "MWK" 6141-30
41/2" LOCK-ON PADDLE ELECTRIC GRINDER-MWK614730>
Milwaukee 120-VOLT GRINDER-USE "MWK" 6141-30
4-1/2" ANGLE ELECTRIC GRINDERS-MWK614830 >
Milwaukee 120-VOLT GRINDER-USE "MWK" 6121-31
4-1/2" ELECTRIC ANGLE GRINDER-MWK612231>
Milwaukee 120-VOLT GRINDER-USE "MWK" 6121-30
4-1/2" ELECTRIC ANGLE GRINDERS-MWK612230 >
Milwaukee 120-VOLT GRINDER-USE "MWK" 6117-33
4-1/2" HEAVY DUTY ANGLE GRINDER-MWK611633>
Recently Viewed
#140 COTTER PIN CONNECTING LINKS-REN1401CL >
6" -DIA 6" -WIDE CONVEYOR PULLEY-BRWD6C6XT15 >
12-RIB POLY-V V-BELT - PIX290J12>
5-VX-500/09 PIX BELTS
9-GROOVE BANDED 5-VX-500 V-BELT - PIX5VX500/09>
HAND OILER 15" FLEXIBLE SPOUTS-GOL301026 >
NEOPRENE COUPLING INSERTS-BRWJZ3N >
