Milwaukee® M12™ FUEL™ 2504-20 Cordless Hammer Drill, 1/2 in Keyless Chuck, 12 VAC, 0 to 450/0 to 1700 rpm No-Load, Li-Ion Battery
The M12 FUEL™ hammer drill driver is the most capable, lightest weight, most compact tool in its class. The POWERSTATE™ brushless motor delivers the power to do a wide variety of applications at 1700 RPM’s and 350 in-lbs of torque. Weighing only 2.3 lbs it is extremely portable, great for overhead applications, reduces fatigue throughout the day. At 6.6 in. in length this tool has the best access in tight spaces. Redlink™ plus intelligence protects the tool from overloads and overheating while ensuring maximum performance. Using REDLITHIUM™ 2.0 Ah compact and 4.0 Ah extended capacity battery packs they deliver more work per charge and more work over the life of the pack than competitive batteries.
-
BrandMilwaukee®
-
UPC045242509003
-
Manufacturer Part Number2504-20
-
CountryUSA|Canada
-
Chuck Size1/2 in
-
Chuck TypeKeyless
-
Torque Rating350 in-lb
-
ColorBlack/Red
-
Handle TypeT-Handle
-
Voltage Rating12 V AC
-
Control TypeVariable Speed
-
No-Load Speed0 to 450/0 to 1700 rpm
-
Housing MaterialGlass Filled Nylon
-
Bare Tool/KitKit
-
Battery Capacity2/4 Ah
-
Battery IncludedNo
-
Battery TypeLi-Ion
-
Dimensions6.6 in L x 2.1 in W x 7.8 in H
-
Blows per Minute0 to 25500 bpm
- Lightest weight in its class for tool belt portability and less fatigue in the work day
- Most compact in its class for the best access in tight spaces
- 1/2 in all metal chuck for maximum grip and bit retention
- 1700 RPMs for faster drilling speeds
- 350 in-lbs of peak torque
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 423K49 |
| Grainger | 423K49 |
-
Alternative Part Number14280296
-
UNSPSC27112703
-
IDEA Index ID14280296
-
Package DescriptionEACH
-
Owners/User Manual
Recently Viewed
Milwaukee® M12™ FUEL™ 2504-20 Cordless Hammer Drill, 1/2 in Keyless Chuck, 12 VAC, 0 to 450/0 to 1700 rpm No-Load, Li-Ion Battery
The M12 FUEL™ hammer drill driver is the most capable, lightest weight, most compact tool in its class. The POWERSTATE™ brushless motor delivers the power to do a wide variety of applications at 1700 RPM’s and 350 in-lbs of torque. Weighing only 2.3 lbs it is extremely portable, great for overhead applications, reduces fatigue throughout the day. At 6.6 in. in length this tool has the best access in tight spaces. Redlink™ plus intelligence protects the tool from overloads and overheating while ensuring maximum performance. Using REDLITHIUM™ 2.0 Ah compact and 4.0 Ah extended capacity battery packs they deliver more work per charge and more work over the life of the pack than competitive batteries.
Leviton® 5821 Heavy Duty Grounding Narrow Body Straight Blade Receptacle, 250 V AC, 20 A, 2 Poles, 3 Wires, Brown
Leviton® line of Heavy Duty Specification Grade receptacles are designed and manufactured to withstand the most demanding environments. Available in a wide variety of configurations, including isolated ground, tamper-resistant, etc., these Commercial Grade devices are the electrical contractors choice for use in hotels, schools, hospitals and commercial office buildings.
Bevel and miter gearing is a form of gearing in which the tooth-bearing surfaces are the faces of the gears rather than the edges. In bevel and miter gearing, the gears are cone shaped. This allows the edges of the mating gears to mesh and transmit torque. The geometry of the mesh creates a 90 deg angle. As a result, this type of gearing is suitable for applications where a change of direction is required. Other designs exist to create other angles however 90 deg serves the majority of applications. In bevel and miter gearing the input and output shaft are intersecting. It is typical for bevel and miter gear reducers to have lower reduction ratios. For example, 5:1 and lower are typical and they are different than other types of gearing. Two types of bevel and miter gearing are typical. These are straight and spiral. As the name implies, the teeth of straight bevel gears are cut straight. This means that the teeth are oriented perpendicular to the outside edge of the gear. The teeth on spiral bevel gears are cut at an angle to the outside edge of the gear. This type of gearing is said to have "helical" teeth and the angle is called the "helix" angle. Bevel and miter gearing have proven reliable for many years. The use of this type of gearing extends across many industries. Some of these include food processing, woodworking, paper and textile.
1/4" X 36" HARDWARE CLOTH--100' PER ROLL-JWH717905R >
1" X 60" X 150' ROLL POULTRY NETTING-JWH718138R >
SEAT, SPRINGS, AND CONICAL SPRINGS DELTA REPAIR KIT FOR SINGLE HANDLE FAUCET CONTAINS 2" EACH-JWH420707 >
