Milwaukee Tool
Milwaukee DRILL CHUCK KEYS MWK 48-66-3080
This chuck key tightens the jaws of the 3/8 in. capacity chuck (48-66-0240), (48-66-0805) and (48-66-0806_. Key holder (48-66-4040) should be used to attach this chuck key to the collet's.
Milwaukee DRILL CHUCK KEY HOLDERS MWK 48-66-4080
This chuck key holder securely attaches chuck key 48-66-3200 to the cord set of your drill which has chuck 48-66-0070, 48-66-0104 or 48-66-0230 on it.
Milwaukee DRILL CHUCK KEY HOLDER MWK 48-66-4040
This chuck key holder securely attaches chuck key 48-66-3280, 48-66-2110, 48-66-3480, 48-66-3080 or 48-66-3240 to the corset of your drill which has chuck 48-66-0240, 48-66-0795, 48-66-0797, 48-66-0805, 48-66-1360, 48-66-5185, 48-66-1381or 48-66-2100 on it.
Milwaukee DRIFT PINS MWK 48-86-0120
The Milwaukee B taper bit adapter lets you use B taper bits in your spline drive rotary hammer for greater productivity. Get more out of your spline drive rotary hammer, including models 5318-21, 5319-21, 5321-21, 5321-22 and 5345-21, with this heavy-duty, all-metal a taper bit adapter. Includes a drift pin (48-86-0120).
Milwaukee DIAMOND CORE BIT ADAPTERS MWK 48-04-0160
The Milwaukee® diamond bit adapter increases your capacity for concrete coring on the jobsite. Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
Milwaukee DEFLECTOR NOZZLES MWK 49-80-0293
The 49-80-0293 deflector nozzle can be used with all Milwaukee heat guns to deflect the air away from glass when stripping paint or softening putty. Includes nozzle only.
Milwaukee DACRON FILTER BAGS MWK 49-90-0320
The Dacron filter bag is suited to pickup medium fine dust as well as coarse sharp material. It fits over the cloth filter/wire frame assembly between the motor and the tank in models 8911, 8912, 8925, 8926, 8927, 8935, 8945 and 8965.
Milwaukee CORE/HOLE DRILLING KITS MWK 4120-22
This contractor series large base stand features a cast aluminum base with 4 leveling screws for fast accurate leveling adjustment. The durable precision-ground 2-1/2 in. steel column is 43-1/2 in. high and has a universal motor adapter plate. The reversible feed handle helps the operator use the unit from either side. Model 4120-22 comes with model 4096 coring motor, Vac-U-Rig® kit as well as a meter box. The Vac-U-Rig® assembly uses a vacuum pump to apply suction to a large pad mounted on the bottom of the rig. This aids in stability when coring holes.
Milwaukee CORE DRILLING RIG METER BOXES MWK 48-51-0120
Switch box, 20 amp, 120 Volt. Ammeter and power switch are located on the front of the receptacle for easy operator access. Supplied as standard equipment with diamond drill rig model 4115-22 and 4120 - 22.
Milwaukee CORE DRILLING KIT BASES MWK 4120
This contractor series large base stand features a cast aluminum base with 4 levelling screws for fast accurate levelling adjustment. The durable precision ground 2-1/2 in steel column is 43-1/2 in high and has a universal motor adapter plate. The reversible feed handle helps the operator use the unit from either side.
Milwaukee CORE DRILL VAC-U-RIG MOBILE STANDS MWK 48-10-0090
This is the same base assembly included with diamond drill rig model 4130 and 4136 and can be used with models 4125. Use when drilling area is not in confined spaces. This base offers greater support for the diamond drill rig and vacuum assembly than the 48-10-0080 base. Includes two wheels and four leveling screws.
Milwaukee CORE DRILL SPACER ASSEMBLYS MWK 49-67-0110
This spacer mounts between the cradle and the diamond drill motor to increase the bit capacity from 10 in. to 14 in. For use with models 4125, 4130 and 4136.
Milwaukee CORE BITS--USE "MWK" 48-17-3120
12" DIAMOND CONCRETE CORE BITS-MWK48169605>
Milwaukee CORE BITS--USE "MWK" 48-17-3100
10" DIAMOND CONCRETE CORE BITS-MWK48169506>
Milwaukee CORE BITS--USE "MWK" 48-17-3080
8" DIAMOND CONCRETE CORE BITS-MWK48168006>
Milwaukee CORE BITS--USE "MWK" 48-17-3035
3-1/2" DIAMOND CONCRETE CORE BITS-MWK48163511>
Milwaukee CORE BITS--USE "MWK" 48-17-3012
1-1/4" DIAMOND CONCRETE CORE BITS-MWK48161260 >
Milwaukee CORE BIT RUBBER MWK 48-20-5171
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thick wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
Milwaukee COPPER WASHERS MWK 45-88-8565
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
Milwaukee CONCRETE DRILL RIG VACUUM PADS MWK 49-22-7100
Vacuum pad assembly for use with models with detachable vacuum pads, 4115, 4125, 4130, and 4136. Single vacuum pad which provides approximately 1,800 Lb. of holding force. Supplied as standard equipment (with models 4115-22 and 4120-22).
Milwaukee CONCRETE DRILL RIG STANDS/BASES MWK 4130
The Milwaukee® model 4130 dymo-rig stand designed for the heavy duty hole driller. Larger column and base assembly ensure strength and durability for many years service. dymo-rig stands feature large wheels for ease of movement. You can bolt it to the wall or the floor or use the optional vac-pad for added versatility.
Milwaukee CONCRETE CORE DRILL RIG METER BOX MWK 48-51-0100
Switch box, 30 amp, 120 Volt. Ammeter and power switch are located on the front of the receptacle for easy operator access. A second outlet is located on the backside of the unit. Supplied as standard equipment with Vac-u-rig model 4136.
Milwaukee COMPLETE REPAIR KITS FOR MODEL A MWS K-10
COMPLETE REPAIR KITS FOR MODEL A-MWSK10>
Milwaukee COMPACT BILLET TORPEDO LEVELS MWK 48-22-5107
The Milwaukee billet torpedo level features amplified rare earth magnets for over 2X the holding power of leading competitors. The maximized viewing area ensures that the user can make a fast and accurate readings of 1/8 in. and 1/4 in. per foot in any position. The optimized top and back side pipe grooves make this the optimal tool for working with both small and large diameter pipes. The 48-22-5107 Milwaukee billet level also offers a weld clearance and laser etched ruled edge.
Recently Viewed
1-5/8" 6-PT 1"-DR I/SOCKETS - ALL37128 >
1-1-1/16" -ID 2-B PILLOW BLOCK UNIT-MBUVPE227 >
SNW-13 X 2-1/4 WESCO 2-1/4" SPHERICAL BEARING ADAPTERS
The term Wesco nw13x21/4 does not match a standard product name or part number from Wesco Industrial Products or Wesco International. It may combine an NW13 metric/nominal size component (such as a braided hose or cable protection conduit) with dimensions like 21/4 inches.
1" X 96" 1-PLY ENDLESS NYLON SLING - SWC10815 >
5-GROOVE A OR B-BELT SD-BUSHING SHEAVE - IDC5B052SD>
7/16" X 5-1/2" SAE GR-5 Hex Head Capscrew
