Milwaukee Tool
Milwaukee IMP/WRENCH--USE "MWK" 2962-P-22-R
Delivering 450 ft-lb fastening torque and 600 ft-lb nut-busting torque, the M18â„¢ FUELâ„¢ mid-torque impact wrench is more powerful while also being upto 4 in shorter and upto 2 lb lighter than many competitive impact wrenches. The POWERSTATEâ„¢ brushless motor delivers upto 0 to 2400 rpm resulting in increased productivity. REDLINKâ„¢ Plusâ„¢ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or over heating. For use with REDLITHIUMâ„¢ compact batteries or extended capacity batteries, the M18â„¢ FUELâ„¢ mid-torque delivers more work per charge and more work over the life of the pack than competitive batteries on the market. The 3-mode DRIVE CONTROLâ„¢ provides greater control over output speed and power for greater versatility. At 6.7 in in length and 5.3 lb with a 5.0Ah battery, the M18â„¢ fuel 1/2 in mid-torque impact wrench delivers the balance and weight desired by professionals for all day use. This tool includes 1/2 in pin detent anvil which provides superior socket retention. A new overmold material gives you ultimate comfort during prolonged use while lasting longer against corrosive materials.
Milwaukee HOSES MWK 49-90-0040
Black 15 Ft. long neoprene lined, wire reinforced, oil resistant 1-1/2 in. I.D. hose has two molded cuff ends. Molded ends fit into swivel end or compression fit connectors which are ordered separately.
Milwaukee HOOK NOZZLES MWK 49-80-0292
The 49-80-0292 hook nozzle can be used with all Milwaukee heat guns for bending, soldering pipe, shrinking tubing or any application where the heat needs to surround the work piece. Includes nozzle only.
Milwaukee HOLESAWS--USE "MWK" 49-56-0713
Milwaukee® carbide tipped hole saws provide long life and faster cutting in cement board, ceramic tiles, fiberglass and wood products such as fiberboard, flake board and plywood. Use a carbide tipped pilot bit (49-56-8005) when cutting ceramic tile, brick and other abrasive materials.
Milwaukee HEXDRIVER KITS--USE "MWK" 3453-22
The M12â„¢ FUELâ„¢ 1/4 in hex impact driver once again raises the bar for 12V performance with best in class driving speed, power and size. By focusing on productivity, this impact driver gets the job done faster by being over 20% faster in application speed vs the competition. This tool outputs over 1300 in-lb of torque that allows the user to get more work done by completing a wide range of fastening. Measuring only 5.1 in length allows for unmatched access in tight spaces. The POWERSTATEâ„¢ brushless motor delivers upto 0 to 3300 rpm with constant power output to drive screws faster. REDLINKâ„¢ Plusâ„¢ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. For use with M12â„¢ REDLITHIUMâ„¢ compact batteries or extended capacity batteries which deliver more work per charge and more work over the life of the pack than competitive batteries on the market. The 4-mode drive control provides greater control over output speed and power for greater versatility by delivering 0 to 1300 rpm in mode 1, 0 to 2400 rpm in mode 2 and 0 to 3300 rpm in mode 3. Mode 4 is self-tapping screw mode which is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Milwaukee HEXDRIVER KITS--USE "MWK" 3453-22
The M12™ FUEL™ 1/4 in hex impact driver kit delivers maximum performance in a compact size. This hex impact driver provides up to 3X longer motor life, up to 2X more runtime and proprietary Milwaukee® 2-mode DRIVE CONTROL™ for better control Over the power and speed required for specific applications. The POWERSTATE™ brushless motor outperforms all leading competitors with constant power output, yet runs cooler with no wearable components. The REDLITHIUM™ 2.0 compact battery pack delivers up to 20PERC more power and 2X more recharges than standard Lithium-Ion batteries, as well as best-in-class performance in extreme jobsite conditions. Its reduced size and weight cut down on user fatigue, while the onboard fuel gauge helps you monitor the charge more accurately, so there's less downtime on the job. REDLINK™ Plus™ intelligence ensures optimized performance and protection from overload, overheating and over-discharge.
Milwaukee HEXDRIVER KITS--USE "MWK" 2953-22
The M18â„¢ FUELâ„¢ 1/4 in hex impact driver is the most powerful tool in its class. At 1800 in-lb of fastening torque, this tool drives screws faster but also provides greater control Over power and speed thanks to its proprietary 4-mode DRIVE CONTROLâ„¢. The POWERSTATEâ„¢ brushless motor delivers up to 0 to 3000 rpm with constant power output to drive screws faster. REDLINKâ„¢ Plusâ„¢ intelligence is the most advanced electronic system on the market, preventing damage to the tool and battery caused by overloading or overheating. REDLITHIUMâ„¢ XC5 batteries deliver more work per charge and more work Over the life of the pack than competitive batteries on the market. The 4-mode DRIVE CONTROLâ„¢ provides greater control Over output speed and power for greater versatility by delivering 0 to 850 rpm in mode 1 0 to 2100 rpm in mode 2 and 0 to 3000 rpm in mode 3. Self-tapping screw mode is designed to reduce walking when starting self-tapping screws as well as reduce overdriving, breaking and stripping out screws.
Milwaukee HEXDRIVER KITS--USE "MWK" 2953-22
The M18â„¢ FUELâ„¢ 1/4 in hex impact driver is the fastest, most compact and most powerful tool in its class. The POWERSTATEâ„¢ brushless motor delivers upto 2000 in-lb of torque and upto 30% faster driving speed, increasing user productivity for the most demanding fasteners on the job. At only 4.59 in L, this is the most compact tool in its class, allowing users to have more access in tight spaces. The REDLINKâ„¢ Plusâ„¢ intelligence ensures maximum performance and protects from overloads, heating and or over-discharge. The REDLITHIUMâ„¢ battery pack delivers more work per charge and more work over the life of the pack when compared to competitors. The 4-Mode DRIVE CONTROLâ„¢ provides greater control over output speed and power, for greater versatility. The self-tapping screw mode provides faster installation time by reducing stripping of fasteners.
Milwaukee HEAT GUN ACCESSORY KITS MWK 49-80-0300
The 49-80-0300 assortment includes the 49-80-0292 hook nozzle, 49-80-0293 deflector nozzle, 49-80-0294 air spreader nozzle, and 49-80-0297 air reduction nozzle for most common heat gun applications. Fits all Milwaukee heat guns.
Milwaukee HAMMERDRILLS--USE "MWK" 2904-22
The M18â„¢ FUELâ„¢ hammer drill is the most powerful 18 V cordless drill on the market. The POWERSTATEâ„¢ brushless motor delivers up to 1200 in-lb of torque and up to 2000 rpm, providing faster drilling speed under heavy load to increase productivity. At only 7-3/4 in L, it is the most compact drill in its class, reducing fatigue when used for extended periods of time and allowing access to tight workspaces. REDLINKâ„¢ Plusâ„¢ intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The REDLITHIUMâ„¢ XC5 battery pack delivers more work per charge and more work Over the life of the pack than the competitors. The M18â„¢ FUELâ„¢ hammer drill's all metal ratcheting locking chuck provides maximum grip, bit retention and durability.
Milwaukee HAMMERDRILLS--USE "MWK" 2904-22
The M18â„¢ FUELâ„¢ 1/2 in Hammer Drill is the industry's most powerful drill by delivering up to 60% more power, up to 1.5 in shorter length and up to 2X faster speed under heavy load. The POWERSTATEâ„¢ brushless motor delivers 1200 in-lb of torque and 2000 rpm, providing fast drilling through demanding applications. At 6.9 in length, this is the most compact drill in its class, giving better access in tight spaces and reducing fatigue. The REDLINKâ„¢ Plusâ„¢ intelligence ensures maximum performance and protects from overloads, heating and over discharge. The REDLITHIUMâ„¢ XC5 battery pack delivers more work per charge and more work over the life of the pack when compared to competitors. The all metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance.
Milwaukee HAMMERDRILLS--USE "MWK" 2904-20
The M18â„¢ FUELâ„¢ hammer drill is the most powerful 18 V cordless drill on the market. The POWERSTATEâ„¢ brushless motor delivers up to 1200 in-lb of torque and up to 2000 rpm, providing faster drilling speed under heavy load to increase productivity. At only 7-3/4 in L, it is the most compact drill in its class, reducing fatigue when used for extended periods of time and allowing access to tight workspaces. REDLINKâ„¢ Plusâ„¢ intelligence ensures maximum performance and protection from overload, overheating and over-discharge. The REDLITHIUMâ„¢ XC5 battery pack delivers more work per charge and more work Over the life of the pack than the competitors. The M18â„¢ FUELâ„¢ hammer drill's all metal ratcheting locking chuck provides maximum grip, bit retention and durability.
Milwaukee HAMMERDRILLS--USE "MWK" 2904-20
The M18â„¢ FUELâ„¢ 1/2 in. hammer drill is the industry's most powerful drill delivering up to 60% more power, is up to 1.5 in. shorter and is up to 2X faster under heavy load. The POWERSTATEâ„¢ brushless motor delivers 1,200 in-lbs of torque and 2,000 RPMs providing fast drilling through demanding applications. At 6.9 in. in length this is the most compact drill in its class giving better access into tight spaces and reducing fatigue. The REDLINK Plusâ„¢ intelligence ensures maximum performance and protects from overloads, heating or over-discharge. The REDLITHIUM XC5.0â„¢ battery pack delivers more work per charger and more work over the life of the pack than competitors. The all metal ratcheting chuck is the best in class by providing increased bit grip strength and corrosion resistance.
Milwaukee HAMMERDRILLS--USE "MWK" 2607-22-CT
The most compact hammer drill driver in its class is more powerful than the competition. Built with a Milwaukee® 4-pole frameless motor, the M18™ compact 1/2 in. drill driver delivers 500 in-lbs of torque and up to 1,800 RPM. At only 7-1/4 in. length, this drill driver allows you access to the tightest work spaces. An all-metal gear case and 1/2 in. metal chuck provide maximum durability, even on the most challenging work sites.
Milwaukee HAMMERDRILL/HEXDRIVER KITS MWK 2893-22
Our M18™ brushless 2-tool combo kit (2893-22CX) offers the best-in-class drilling and fastening solutions. The 1/2 in hammer drill (2902-20) and 1/4 in hex impact driver (2850-20) feature the M18™ cordless system's patented technologies and electronics, innovative motor design and superior ergonomics, providing the most efficient blend of power, weight and performance in its class. The brushless 1/2 in hammer drill is the most powerful drill in its class, delivering 725 in-lb of torque. The 1/4 in hex impact driver has the fastest application speed in its class and delivers 1600 in-lb of torque. Both of our compact tools feature Milwaukee® brushless motors optimized specifically for the tool. Built-in REDLinK™ electronics enhances the performance of the M18™ REDLITHIUM™ batteries, providing more efficient power delivery and fewer trips to the charger.
Milwaukee GUIDE PLATES MWK 48-20-6156
Increase your precision in masonry and concrete drilling with the Milwaukee® guide plate for thin wall core bit. You'll see reduced bit walk and improved bit stability when you use Milwaukee's durable plastic guide plate and centering pin (not included) for starting holes with your SDS plus rotary hammer drill.
Milwaukee GRINDER WHEEL GUARDS MWK 49-12-0365
No tools are required to assemble this 4-1/2 in. type 27 guard to your Milwaukee magnum® and super magnum® grinders and models 6140 and 6145 serial number E series and above. This guard can be rotated around the gear case shoulder to offer optimum protection to the operator.
Milwaukee GRINDER WHEEL ADAPTERS MWK 48-03-1000
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee® specified replacement parts to achieve maximum life and performance from your tool. If unable to locate an accessory or repair part please contact Milwaukee® via its website.
Milwaukee GRINDER RETAINING NUTS MWK 49-40-0360
GRINDER RETAINING 5/8" -11 NUTS-MWK49400360 >
Milwaukee GRINDER NON-THREADED FLANGES MWK 49-05-0041
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
Milwaukee GRINDER METAL WHEEL GUARDS MWK 49-12-0305
Milwaukee® 49-12-0305 Type 1 Sander Guard, For Use With Milwaukee® 6081-20 Sanders
Milwaukee GRINDER KITS--USE "MWK" 3670-22
The M18â„¢ FUELâ„¢ 4-1/2 in. to 6 in. braking grinder is Milwaukee's most powerful small angle grinder to date, with a high performance brushless motor that generates 13 A corded power. The POWERSTATEâ„¢ brushless motor delivers 9,000 RPM, giving the tool the power needed to exceed performance expectations in all applications, as well as longer motor life, providing lower cost of ownership compared to brushed motors. Integrated Rapid Stopâ„¢ braking technology stops all accessories in 3 seconds or less, creating a safer user experience. By offering a full 6 in. capacity, users can feel confident replacing their corded tools with the M18â„¢ FUELâ„¢ 4-1/2 in. to 6 in. braking grinder. The power and runtime delivered by the M18â„¢ 6.0 high output batteries provides the user with more material removed per charge, making users more productive and efficient on the jobsite. Tool-free accessory changes using the FIXTEC nut and guard adjustments mean less downtime during work. Grinding wheel sold separately.
Milwaukee GRINDER 5/8"-11 FLANGE NUTS MWK 49-05-0050
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool.
Milwaukee GREEN SURE-SHOT STEEL SPRAYERS MWS A-1000-G
GREEN ENAMELED STEEL SPRAYERS-MWSA1000G>
Recently Viewed
PIX B-87 IS A CLASSICAL V-BELT,90" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIB
V-BELT OUTSIDE CIRCUMFERENCE 90"-PIXB87 >
PIX A-96 IS A CLASSICAL V-BELT 98" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA96 >
Klein Tools electronics screwdrivers are designed for precision work, and feature a swivel cap for optimum control. Made of the highest quality tempered steel, carefully heat-treated for maximum strength, and precision milled to fit screw openings securely. Rotating caps and Klein's exclusive Cushion-Gripâ„¢ handles offer outstanding comfort and control. Corrosion-resistant chrome plated barrel that includes two double-ended bits that exceed ANSI standards.
SF-2-3/8" QUICK DISCONNECT BUSHING WITH 2-3/8" BORE, 5/8" X 5/16" KEYWAY-BRWSF23/8 >
PIX B-100 IS A CLASSICAL V-BELT, 103" OUTSIDE LENGTH, 21/32" TOP WIDTH, 13/32" THICKNESS, 1 RIBS
PRECISE FIT, DURABLE POLYESTER CONSTRUCTION, VERSATILE APPLICATIONS, RESISTANT TO WEAR AND STRETCH, IMPROVES EQUIPMENT EFFICIENCY.
-PIXB100 >
PIX B-103 IS A CLASSICAL V-BELT, 106" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIBS
PRECISE FIT, DURABLE POLYESTER CONSTRUCTION, VERSATILE APPLICATIONS, RESISTANT TO WEAR AND STRETCH, IMPROVES EQUIPMENT EFFICIENCY.
-PIXB103 >
