Milwaukee Tool
SHOE ASSEMBLY - MWK45160645>
Used with reciprocating saws. The shoe assembly attaches to the front of the saw and is used to press the saw against the material being cut.
Milwaukee's 18 ga. Shear model 6850 features a swivel head that contains a center blade (48-44-0151), a left blade (48-44-0161) and a right blade (48-44-0171). Each blade is replaceable separately, but it is recommended to change all three at the same time for maximum sharpness. This style shear removes a continuous metal curl approximately 1/4 inch wide.
1" ELECTRIC SDS ROTARY HAMMER-MWK536321 >
M-12 SCREWDRIVER/CLAMP METER COMBO KIT-MWK223923>
SAWZALL RECIPROCATING SAW BLADE-MWK49221126 >
SANDER DISC RETAINER NUTS-MWK49400380 >
SANDER 1/2"-13 DISC RETAINER NUTS-MWK49400370>
SANDER 5/8"-11 DISC RETAINER NUTS-MWK49400350>
SOCKET HEAD CAPSCREW-MWK06752402 >
The Milwaukee 49-16-2867 protective boot is for use with the M18â„¢ FUELâ„¢ 1 in. high torque impact wrench (2867-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Fits M18â„¢ FUELâ„¢ Compact Impact Wrench model numbers 2754-20, 2755-20, and 2755B-20.
1-1/8" SDS ELECTRIC ROTARY HAMMER-MWK535921 >
Milwaukee® Aviation snips are built for long life and durability. Forged blades deliver up to 10X more cuts than cast blades. Bolt lock ensures the blades won't loosen and chrome plating provides rust protection. The flush pivot bolt won't hang up on material for easy use. The metal lock secures the tool for storage and is easily operated with one hand. The offset model features a 45 degree offset handle for clearance over the cut material. Ideal for right or straight cuts.
The MILWAUKEE® die grinder tool boot is for use with the M12 FUEL™ Right Angle Die Grinder (2485). This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. The die grinder accessory is not for use on or near live electrical circuits. Use on any other product other than the M12 FUEL™ Right Angle Die Grinder (2485) may result in damage to the tool motor and may void the tool's warranty.
Milwaukee® 34-60-1030 Retaining Ring, For Use With CP8730 Serial A33A 14.4 VDC 3/8 in Square Impact Wrench
Milwaukee® 44-86-0455 Retainer, For Use With 6880 Serial 630D 10 AWG Nibbler
Milwaukee’s industrial connecting test leads attach to all digital multimeter, clamp meters and fork meters. Designed to withstand up to 1000 V and 10 A, this set of connecting test leads used along with 49-77-1004 industrial test probes and 49-77-1005 industrial alligator clips are ideal for measuring voltage, current and resistance of most electrical systems. Covered by 2 year warranty. Nothing but heavy duty.
Soft side contractor bag made of tough water resistant 600 denier material. Provides extra storage for job site tools and accessories. Shoulder strap or dual handle straps for easy carrying. Durable zipper closure. 20-1/2 in. long by 9 in. wide by 8 in. high.
Milwaukee® 22-16-0275 Carbon Brush, For Use With 6225 2-Speed Band Saw
Due to prolonged, heavy use some components may need to be replaced. Use only Milwaukee specified replacement parts to achieve maximum life and performance from your Milwaukee Tool. If unable to locate an accessory or repair part please contact Milwaukee Tool.
The Milwaukee 49-16-2767 tool boot is for use with the M18 FUELâ„¢ high torque impact wrench (2767-20 & 2863-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Milwaukee® 23-66-0020 Switch, For Use With 6175 14 in Cut-Off Machine
Milwaukee® 43-44-0605 Base Gasket, For Use With 4120 Serial A09A Large Base Dymorig
Recently Viewed
PIX A-155 IS A CLASSICAL V-BELT 157" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
V-BELT OUTSIDE CIRCUMFERENCE 157" -PIXA155 >
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING. -PIXB89K>
PIX B-103 IS A CLASSICAL V-BELT, 106" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 1 RIBS
PRECISE FIT, DURABLE POLYESTER CONSTRUCTION, VERSATILE APPLICATIONS, RESISTANT TO WEAR AND STRETCH, IMPROVES EQUIPMENT EFFICIENCY.
-PIXB103 >
1/8-PTF 65-DEG 3/4 GREASE FITTING-ALM1722B >
PIX A-48 IS A CLASSICAL V-BELT 50" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
PIXA48 >
PIX A-32 IS A CLASSICAL V-BELT 34" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
PIXA32 >
