CRC® 03041 Dry Film Extremely Flammable Multi-Purpose Silicone Lubricant, 5 gal Pail, Liquid Form, Clear/Water White, -40 to 400 deg F
Multi-purpose silicone spray for food processing and handling applications. Forms a colorless, odorless, non-staining film. Eliminates binding and sticking in most metal to non-metal applications. Meets FDA Regulation CFR 21-178.3570. NSF H1 Registered.
-
BrandCRC®
-
UPC078254030418
-
Manufacturer Part Number03041
-
CountryUSA
-
Temperature Range-40 to 400 deg F
-
Flammability Rating3
-
Flash Point<0 deg F
-
FormLiquid
-
ColorClear/Water White
-
TypeDry Film Extremely Flammable Multi-Purpose
-
GradeFood
-
CompositionNaphtha (Petroleum), Hydrotreated Light, 2-Methylpentane, Polydimethylsiloxane, n-Hexane, 2, 2-Dimethylbutane
-
VOC Content649.3 g/L
-
Container Size5 gal
-
Container TypePail
-
Net Weight5 gal
-
Base TypeSilicone
-
Specific Gravity0.6694
-
Odor/ScentSolvent
- Multi-purpose silicone spray for food processing and handling applications
- Forms a colorless, odorless, non-staining film
- Eliminates binding and sticking in most metal to non-metal applications
- 10 years of shelf life
- 350 V/mil dielectric strength
- 140 deg F boiling point
- <-76 deg F freeze point
- Evaporation rating of 19
| Competitor Name | Cross-Reference Number |
|---|---|
| Fastenal | 0603868 |
-
UNSPSC15121526
-
IDEA Index ID8423431
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|RoHS Compliant|NSF H1 Registered|FDA CFR 21-178.3570|PROP65: Reproductive Harm - www.P65Warnings.ca.gov
-
Specification Sheet
Recently Viewed
CRC® 03041 Dry Film Extremely Flammable Multi-Purpose Silicone Lubricant, 5 gal Pail, Liquid Form, Clear/Water White, -40 to 400 deg F
Multi-purpose silicone spray for food processing and handling applications. Forms a colorless, odorless, non-staining film. Eliminates binding and sticking in most metal to non-metal applications. Meets FDA Regulation CFR 21-178.3570. NSF H1 Registered.
USED FOR NEW MACHINERY, GENERAL MAINTENANCE AND SHOP REPAIRS. IT IS A NECESSITY IN ALL APPLICATIONS WHERE ROTATING POWER DEVICES ARE USED. MOST TOLERANCES ON DIMENSIONS ARE OVERSIZED TO ASSURE TIGHT FITS IN KEYWAYS FOR POSITIVE, ZERO BACKLASH POWER TRANSMISSION
-PRC15200 >
Remke Tuff-Seal™ 7303-014R Closed Mesh Insulated Single Weave Wide Range Strain Relief Grip With Galvanized Steel Mesh, 1.2 to 1.5 in Cable, For Use With 1-1/2 in NPT Connector, Aluminum
Tuff-Seal™ Wire Mesh Cable Grips distribute stress over a large area to prevent damage to wire, cable and flexible conduit. They are built to perform their task over an extended period of time without loosening their hold. All Remke wire mesh grips are available in a wide selection of cable ranges and eye styles where applicable and can be used in conjunction with any RSR cord connector.
Browning® 1111772 Sprocket, 40 Chain, 20 Teeth, For Use With T25L Torque Limiters, 3.45 in OD
Browning® 1111772 Sprocket, 40 Chain, 20 Teeth, For Use With T25L Torque Limiters, 3.45 in OD
Littelfuse® H21706.3P Fast Acting Cartridge Fuse, 6.3 A, 250 V AC, 63 A Interrupt, Cartridge Body
Littelfuse® H21706.3P Fast Acting Cartridge Fuse, 6.3 A, 250 VAC, 63 A Interrupt, Cartridge Body
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
