Chain & Cable Lubricants
SPRAY-ON SPRAY OPEN GEAR/WIREROPE LUBRICANT SPR 00201
Sprayon LU201 Open Gear and Wire Rope Lubricant is a high performance lubricant that penetrates metal surfaces to reach the core of wire rope. LU201 provides a wide range of lubrication at high temperatures while adhering extremely well to surfaces. It travels on metal surfaces to displace water, resulting in excellent rust protection. Can be used while equipment is in operation.
LPS® ChainMate® 02416 Wire Rope Lubricant, 16 oz Aerosol Can, Gas, Black/Dark Gray, 0.74 to 0.76
Greenlee® Cable-Cream™ CRM-1 Non-Flammable Non-Hazardous Pulling Lubricant, 1 gal Pail, Gel, Light Yellow, 1
Greenlee® Cable-Cream™ CRM-1 Non-Flammable Non-Hazardous Pulling Lubricant, 1 gal Pail, Gel, Light Yellow, 1
Gardner Bender 79-006 Non-Toxic Wire Pulling Lubricant, 1 qt Container Squeeze Bottle Container, Viscous Gel Form, Light Yellow, Specific Gravity: 1
Slides on smoothly and clings throughout the pull. Modified wax-base formula dries to a slippery film.
Crown® by Aervoe® 7043 Wire Rope/Chain/Cable Lubricant, 16 oz Aerosol Can, Black, 0.8
A high-grade lubricating oil, fortified with molybdenum disulfide to penetrate inaccessible areas and provide superior lubrication where temperatures and stress will break down ordinary lubricants.
CRC® 03058 Extreme Duty Flammable Tacky Open Gear and Chain Lubricant, 16 oz Aerosol Can, Semi Viscous Liquid Form, Black, 1.1
A heavy-duty, extreme pressure lubricant recommended for reducing friction & wear in harsh environments. It resists heat & pressure, will not wash or wear off because of weather, & will not break down after repeated workings.
CRC® 03055 Non-Flammable Oil Chain Lubricant, 16 oz Aerosol Can, Liquid Form, 0.874
Blend of synthetic lubricants and mineral oil to keep roller drive and conveyor chains lubricated. Penetrates, lubricates and protects moving parts by reducing friction and wear. NSF H1 rated for incidental food contact.
CRC® 03050 Extremely Flammable Synthetic Chain and Wire Rope Lubricant, 16 oz Aerosol Can, Liquid Form, Clear/Light Amber, 0.6771
CRC chain and wire rope lube is a special blend of synthetic lubricants, solvents and molybdenum designed to keep chains and wire rope in peak operating condition. With a low viscosity and wet film, chain & wire rope lube penetrates deeply between chain links and wire strands to reduce friction and wear that cause metal fatigue. Chain and wire rope lube also contains a tackifier that enables the lubricant to cling tenaciously to metal surfaces without increasing the viscosity. Regular use of chain & wire rope lube will help inhibit corrosion, reduce load stress and prevent wire strands from becoming brittle and fraying.
Recently Viewed
RIDGID® 31660 Coil and Flat Spring Assembly, For Use With 14 in Straight Pipe Wrench
RIDGID® 31660 Coil and Flat Spring Assembly, For Use With 14 in Straight Pipe Wrench
Milwaukee® 2915-DE M18™ FUEL™ HAMMERVAC™ Cordless Dedicated Dust Extractor, For Use With 2915-20 M18™ FUEL™ 1-1/8 in SDS Plus Rotary Hammer with ONE-KEY™
The MILWAUKEE® M18 FUEL™ HAMMERVAC™ 1-1/8” Dedicated Dust Extractor (2915-DE) features an inline design engineered to connect directly to and be powered by the M18 FUEL™ 1-1/8” SDS Plus Rotary Hammer (2915-20). Utilizing the same replaceable certified HEPA filter as other HAMMERVACS™, which filters 99.97% of all particles greater than 0.3µm, means more compatibility on the jobsite. The built-in adjustable depth stop and ruler offer easy and precise adjustments. The dust extractor delivers complete OSHA Table One Compliance when drilling up to 1-1/8 inch diameter and 8 inch depth. This dust extractor features the Milwaukee AUTOPULSE™ Filter Cleaning Mechanism that automatically cleans the filter after each use, ensuring more effective drilling for longer before needing to empty the dust box. The dust box comes equipped with a vacuum port that allows for suctioning out the dust with a large vacuum or dust extractor (such as the 0888-20) instead of dumping the dust out into a trash receptacle, ensuring minimal exposure.
RATCHET-STYLE ELEC/CABLE CUTTERS-GRN753>
J-6-C CHAMPION SPARK PLUG-CSP823 >
3/16" X 1-1/2" BLACK DOWEL PINS-HOL01034>
Streamlight® 76375 4-Cell Black Replacement Battery Stick, 4.8 V DC Nominal, NiCd Battery, For Use With PolyStinger® LED HAZ-LO® Intrinsically Safe Rechargeable Flashlight
Streamlight® 76375 4-Cell Black Replacement Battery Stick, 4.8 VDC Nominal, NiCd Battery, For Use With PolyStinger® LED HAZ-LO® Intrinsically Safe Rechargeable Flashlight