LPS® ChainMate® 02416 Wire Rope Lubricant, 16 oz Aerosol Can, Gas, Black/Dark Gray, 0.74 to 0.76
-
BrandLPS®
-
UPC078827024165
-
Manufacturer Part Number02416
-
CountryUSA|Canada
-
Temperature Range300 deg F
-
Flash Point1.4 deg F
-
FormGas
-
ColorBlack/Dark Gray
-
CompositionAcetone, Residual Oils, Petroleum, Solvent Refined, Petroleum Gases, Liquefied, Sweetened, Distillates Petroleum, Hydroteated Light, Petroleum Oil
-
VOC Content393 g/L
-
Viscosity150 cPs at 75 deg F
-
Container Size16 oz
-
Container TypeAerosol Can
-
Net Weight11 oz
-
Base TypeLiquid
-
Specific Gravity0.74 to 0.76
-
Odor/ScentSlight Petroleum
- Effective under extreme temperature and pressure ranges
- Fortified with molybdenum disulfide
- Deep penetration to the core of wire ropes
- High adhesion
- Lubricant and corrosion protectant
- Use with guards in place to eliminate costly down time
- Increases chain and wire rope life
- Reduces wear caused by friction and corrosion
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 31733082 |
| Grainger | 3HY54 |
| Fastenal | 0143150 |
-
UNSPSC15121520
-
SDS
Recently Viewed
LPS® ChainMate® 02416 Wire Rope Lubricant, 16 oz Aerosol Can, Gas, Black/Dark Gray, 0.74 to 0.76
Arlington Zero to 90™ NMLT7590 Non-Metallic Liquidtight Conduit Connector, 3/4 in Trade, 90 deg, Plastic
Arlington Zero to 90™ NMLT7590 Non-Metallic Liquidtight Conduit Connector, 3/4 in Trade, 90 deg, Plastic
Anvil® 0310001201 FIG 1101 Standard 90 deg Pipe Elbow, 1 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Anvil® 0310000609 FIG 1101 Standard 90 deg Pipe Elbow, 3/8 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
Greenlee® ESM™ DM-200A Digital Multimeter, 60 mV to 1000 V AC/DC, 600 mA to 10 A, 600 Ohm to 60 MOhm, 600 nF to 300 uF Measuring, 600 Ohm, 6/60/600 kOhm, 6/60 MOhm, Backlit LCD Display
200A series was designed to provide all of the critical day to day features of handheld multimeters in a smaller, ergonomic design. Look to this series for CAT IV 300 VAC, CAT III 600 VAC and CAT II 1000 VAC applications. Backed by Greenlee® lifetime limited warranty, the 200A series multimeters offer the professional electrician superior value when compared to the competition.
5:1 WORM GEAR REDUCER-BRW154Q56H5 >
