CRC® 14095 General Purpose Anti-Seize and Lubricating Compound, 16 oz Aerosol Can, Semi-Solid/Paste Form, 1.07
Copper Anti-Seize is a general purpose anti-seize lubricant that prevents seizing caused by high temperature, heavy loads, vibrations and corrosion. Conductive.
-
BrandCRC®
-
UPC078254140957
-
Manufacturer Part Number14095
-
CountryUSA
-
Temperature Range-65 to 1800 deg F
-
Flammability Rating4
-
Flash Point430 deg F
-
FormSemi-Solid/Paste
-
TypeGeneral Purpose
-
CompositionDistillates (Petroleum), Hydrotreated Heavy Naphthenic, Liquefied Petroleum Gas, Copper, Residual Oils (Petroleum), Hydrotreated Calcium Carbonate, Talc (Not Containing Asbestos Fibers)
-
VOC Content324 g/L
-
Container Size16 oz
-
Container TypeAerosol Can
-
Net Weight12 oz
-
Base TypeCopper
-
Specific Gravity1.07
-
Odor/ScentPetroleum
- Copper anti-seize is a general purpose anti-seize lubricant that prevents seizing caused by high temperature, heavy loads, vibrations and corrosion
- Conductive
- 10 years of shelf life
- Non-hardening, electrically conductive, high temperature resistance
- 450 deg f drop point
- <600 deg F boiling point
- Very slow evaporation
- This unique formula has a smooth texture, fine particle sizing and familiar copper color, making it an excellent choice for closely fitted parts needing extreme lubrication
| Competitor Name | Competitor Part Number |
|---|---|
| MSC | 05092077 |
| Fastenal | 0123318 |
| Grainger | 13P451 |
-
Alternative Part Number1004830
-
UNSPSC15121515
-
IDEA Index ID8426170
-
Package DescriptionEACH
-
Standards/ApprovalsARRA Compliant|Buy American Act Compliant|RoHS Compliant|MIL-PRF-907E|PROP65: This product is in Compliant with Prop65; it is not known to contain any chemicals associated with this regulation
-
Specification Sheet
Recently Viewed
CRC® 14095 General Purpose Anti-Seize and Lubricating Compound, 16 oz Aerosol Can, Semi-Solid/Paste Form, 1.07
Copper Anti-Seize is a general purpose anti-seize lubricant that prevents seizing caused by high temperature, heavy loads, vibrations and corrosion. Conductive.
2" 80-GRIT TYPE-P SANDING DISC-PDTMM5961046 >
HCI Preferred Supplier 12048 Adapter, 3/8 x 1/4 in Nominal, Inverted Flare x Male NPTF, CA360 Brass
HCI Preferred Supplier 12048 Adapter, 3/8 x 1/4 in Nominal, Inverted Flare x Male NPTF, CA360 Brass
Milwaukee® 49-57-1752 Tang Drive Annular Cutter, 1-3/4 in Dia Cutter, 1 in D Cutting, Uncoated, Quick-Change Shank
Drill holes up to 3X faster and enjoy fast change-outs with the Milwaukee® 1-3/4 in. quick change tang drive Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 1 in. hole depth in steel, stainless steel, cast iron or aluminum. It leaves a ream-like finish without pre-punching or pilot holes. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0012 or 49-57-0013 on Milwaukee's 4292-1 or 4297-1 magnetic drill press or arbor 49-57-0032 on Milwaukee's 4262-1 mag press.
United Abrasives-SAIT Saitech Attacker® 20046 High Performance Depressed Center Wheel, 4-1/2 in Dia x 1/4 in THK, 7/8 in Center Hole, 24 Grit, Ceramic Alumina Oxide Abrasive
The United Abrasives/SAIT Type 27 Saitech Attacker® is made to go on an angle grinder. High performance, ceramic aluminum oxide grain, is designed to outlast standard aluminum oxide wheels. Soft bond for extremely fast stock removal on hard metals with minimal pressure. Very uniform, high density grain structure for a long life and a cooler cut. United Abrasives/SAIT wheels are reinforced with the highest quality fiberglass for maximum safety and performance. Proudly manufactured in the USA.
MORSE® 10918 1315 Extra Length Drill, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 12 in OAL, HSS
MORSE® 10918 1315 Extra Length Drill, 3/16 in Drill - Fraction, 0.1875 in Drill - Decimal Inch, 12 in OAL, HSS
