T.B. Woods FLANGE COUPLINGS TBW 3-J-7/8
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
-
BrandTB Wood's®
-
UPC698672620055
-
Manufacturer Part Number3J78
-
CountryUSA
-
MaterialSintered Carbon Steel
-
Maximum Speed9200 rpm
-
TypeBore-To-Size Type J
-
Screw Size1/4-20 UNC x 1/4 in L Setscrew
-
Coupling Size03
-
Hub Diameter1-1/2 in
-
Hub Length13/32 in
-
Keyway Size3/16 x 3/32 in
-
Length Through Bore51/64 in
-
Bore Diameter7/8 in
- Type J flanges can be used with EPDM and neoprene sleeves
- Each flange has a standard keyway, one setscrew over the keyway and one setscrew at 90 deg from the keyway
-
UNSPSC31163000
-
Standards/ApprovalsATEX Compliant|PROP65: This product contains lead, known to the State of California to cause cancer and birth defects or other reproductive harm.
-
Catalog
-
Instruction/Installation Manual
Recently Viewed
Type J flanges sizes 3, 4 and 5 are manufactured of sintered carbon steel. The powdered metal manufacturing process provides high dimensional accuracy and uniform material properties for high strength. Size 6 is made of high strength cast iron. Flanges are bored-to-size for a slip fit on standard shafts. The outside face of the flange is precision machined, allowing the surface to be used to align the coupling without special tools.
Armstrong® 10-707 Standard Length Socket Driver Bit, 1/4 in Hex Drive, 7/64 in, 1.312 in L Bit
Armstrong® 10-707 Standard Length Socket Driver Bit, 1/4 in Hex Drive, 7/64 in, 1.312 in L Bit
BBI 601475 Semi-Standard Socket Set Screw, 7/8-9, 1-1/4 in L, Cup Point, Alloy Steel
BBI 601475 Semi-Standard Socket Set Screw, 7/8-9, 1-1/4 in L, Cup Point, Alloy Steel
Browning 15-TOOTH Q-BUS #100 CHAIN SPROCKET BRW H-100-Q-15
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
The Crosby HG-227 Jaw & Eye Turnbuckles feature a forged jaw on one end and an elongated eye on the other, providing flexibility for connecting to clevis pins, eye bolts, or shackles. Built for straight-line tensioning, these turnbuckles are ideal for industrial, marine, and structural applications requiring dependable strength and fatigue performance. All components are hot-dip galvanized for corrosion resistance and meet stringent ASME and Federal standards.
Key Features
Forged and heat-treated construction ensures superior strength and toughness.
Jaw ends use bolt-and-nut assemblies for 1/4"–5/8" sizes, and pin-and-cotter connections for 3/4"–2-3/4" sizes.
Elongated forged eye for easy system integration and reduced stress concentration.
Modified UNJ thread on end fittings; body has UNC threads for consistent engagement.
Hot-dip galvanized for maximum corrosion resistance.
Standard spearpoint blade 2-1/2-Inch (64 mm) long
Screwdriver-tip blade 2-1/2-Inch (64 mm) long
Screwdriver-tip blade locks open
Multi-purpose tool for everyday convenience
Handle is plastic with faux wood grain
Only 3.75-Inches (95.3 mm) closed
Blade is constructed of high quality stainless steel
