AlemiteĀ® 1724-B 45 deg Thread Forming Fitting, 1/8 in Taper Thread, 0.83 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
-
BrandAlemiteĀ®
-
UPC098468317211
-
Manufacturer Part Number1724-B
-
CountryUSA
-
FinishTrivalent Zinc Plated
-
MaterialSteel
-
Thread Size1/8 in Taper
-
Type45 deg
-
Hex Size7/16 in
-
Overall Length0.83 in
- Exceeds 72 hrs salt spray test
- Dirt excluding check ball
- Threads provide strong seal
- Dyed yellow for identification
- 0.373 to 0.38 in hole
-
UNSPSC40141736
-
Package Description1/PK
-
Standards/ApprovalsRoHS Compliant
-
Catalog
Recently Viewed
AlemiteĀ® 1724-B 45 deg Thread Forming Fitting, 1/8 in Taper Thread, 0.83 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
ReelcraftĀ® 3-HR1004-3 Adjustable Hose Bumper Stop, For Use With 7000 and 80000 Series Spring Driven Hose Reels, 3/4 in ID Hose, Rubber, Black, Import
EIKOĀ® 193 Miniature Lamp, 5 W, W2.1x9.5d Lamp, T3.25 Shape, 25 Lumens
Incandescent lamps are still commonly used in homes and businesses and with our wide selection, we have enough shapes, wattages and finishes to fit almost every application and need. Many of our incandescent lamps are also available in an extended life, 130 VAC version, with even more environmentally friendly alternatives coming soon.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision BrandĀ® is the only manufacturer to offer BrandedĀ® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision BrandĀ® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision BrandĀ® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision BrandĀ® is the only manufacturer to offer BrandedĀ® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision BrandĀ® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision BrandĀ® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
AlemiteĀ® 1723-B 90 deg Thread Forming Fitting, 1/8 in Taper Thread, 49/64 in OAL, Steel, Trivalent Zinc Plated
Alemite thread forming fittings have special tapered drive threads which reshape the material in an untapped hole to provide a leak proof seal. They are most effectively installed by spinning into the untapped hole, but may be driven straight into the untapped hole. Thread forming fittings can be replaced by any standard threaded fitting or by another thread forming fitting.
