Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP3150-14MGT-85 9232 Synchronous Belt, 225 Teeth, 14 mm Pitch, 3150 mm OAL, 85 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
-
BrandGates® Power Transmission
-
UPC72053612776
-
Manufacturer Part NumberTP3150-14MGT-85
-
CountryUSA|Canada
-
Pitch14 mm
-
Temperature Range-30 to 180 deg F
-
MaterialNeoprene
-
Tooth ProfileCurved
-
Reinforced MaterialFiberglass
-
Minimum Pulley Diameter104.16 mm
-
Width85 mm
-
Series9232
-
Number of Teeth225
-
Overall Length3150 mm
- Fiberglass tensile cord provides high-strength, excellent flex life and high resistance to elongation
- Belt capacity is equal to standard single-sided PowerGrip® GT®2 belts
- Eliminates lubrication and re-tensioning to reduce maintenance and labor required on drives
- Neoprene body provides protection against grime, grease, oil and moisture
- Gates® Twin Power® belts have nylon facing on both tooth surfaces providing equal load carrying capabilities on either side of the belt
- Twin Power® belts have teeth on both sides to provide synchronization from both driving surfaces
- Substantially quieter operation enables wide application usage
-
Alternative Part Number92320157
-
UNSPSC26111811
-
Package DescriptionEACH
-
Standards/ApprovalsRMA Standard
-
Instruction/Installation Manual
-
Catalog
-
Specification Sheet
Recently Viewed
Gates® Power Transmission PowerGrip® GT®2 Twin Power® TP3150-14MGT-85 9232 Synchronous Belt, 225 Teeth, 14 mm Pitch, 3150 mm OAL, 85 mm W, Neoprene
PowerGrip™ GT™2 Twin Power™ Belts feature dual-sided teeth to provide equal load carrying capacity on either belt surface, enabling synchronization from both driving surfaces. These synchronous belts ensure high loading capacity on contra-rotating drives and ensure smooth running and high flexibility. Gates Twin Power PowerGrip GT2 belts are designed to perform at high speeds and characterized by low-running noise, with a larger tooth profile for increased performance capacity.
Gates® Power Transmission Synchro-Power® AT10-1150-32 Metric AT Synchronous Belt, 32 mm W, 1150 mm OAL, 10 mm Pitch, 115 Teeth, Polyurethane
Gates Synchro-Power™ polyurethane belts are designed for long-lasting and energy-efficient performance on both power transmission and linear applications. They are available in both endless and open-end versions in various sizes, constructions and tooth designs, handling a wide range of loads, speeds and applications.
Appleton® ETP™ 7250S 7000S Non-Insulated Throat Straight Compression Connector, 2-1/2 in Trade, For Use With EMT Conduit, Steel, Zinc Electroplated
Appleton® offer ETP™ 7000S Series steel EMT compression connectors. They are used to ground and secure EMT raceways to boxes and enclosures. The 7000S Series have a male NPS threaded hub and are available with or without an insulated throat.
Gates® Power Transmission Tri-Power® AX144 Heavy Duty Molded Notch V-Belt, AX Section, 1/2 in W Top, 146 in L Outside, 5/16 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
2" X 2" X 1-1/2" BLACK TEE-FIT2X2X11/2BT >
Gates® Power Transmission Hi-Power® II C111 Banded Heavy Duty V-Belt, C Section, 7/8 in W Top, 115 in L Outside, 17/32 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
