Alemite® 1743-B Straight Drive Fitting, 35/64 in OAL, 1/4 in L Shank, Trivalent Zinc Plated
Alemite® 1743-B Straight Drive Fitting, 35/64 in OAL, 1/4 in L Shank, Trivalent Zinc Plated
-
BrandAlemite®
-
Manufacturer Part Number1743-B
-
CountryUSA
-
FinishTrivalent Zinc Plated
-
TypeStraight
-
Shank Length1/4 in
-
Overall Length35/64 in
- Exceeds 72 hrs salt spray test
- Serrated shank provides secure, lasting grip
- Simplifies replacement of damaged fittings in old or oversized holes
- 1/4 in Dia dr
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 03244571 |
-
UNSPSC40141736
-
Package Description10 PK/BG
-
Standards/ApprovalsRoHS Compliant
-
Catalog
Recently Viewed
Alemite® 1743-B Straight Drive Fitting, 35/64 in OAL, 1/4 in L Shank, Trivalent Zinc Plated
Alemite® 1743-B Straight Drive Fitting, 35/64 in OAL, 1/4 in L Shank, Trivalent Zinc Plated
The 5000® Series of bearings is similar in construction to the 400® Series bearing except it has a flange on the outer ring to locate the bearing when pressed into a tube or housing, thus eliminating the need for an external mounting device. The bearings are designed for moderate loads and speeds where running accuracy and noise level requirements do not warrant the more expensive precision ground bearings. This series of bearings feature a full ball complement without a retainer. The rings are case hardened and the soft steel band on the outer ring of the unitized assembly allows the bearing to be pressed into a housing without the necessity of close housing tolerances. The bearings are supplied pregreased as a standard. The bearings are designed for use in applications with speeds not exceeding 1200 rpm.
Dodge® Tigear-2® 26Q15L56 Standard Right Angle Worm Gear Speed Reducer, Quill Input, Solid A Shaft Output, 3.62 hp, 15:1 Gear, 117 rpm Maximum Output, 1708 in-lb Torque Rating
The speed reducer shall be a single reduction worm gear reducer incorporating three input configurations - a quill style for direct attachment of electric motors, a separate keyed input shaft suitable for flexible coupling to a footed motor or belt and pulley input configuration and a motor adapter style input that employs a three piece coupling to connect electric motors to the reducer. These input configurations shall be available in both solid and hollow output shaft designs. The reducer shall be manufactured in the United States of America.
Kuriyama ABF300 ABF Pin Lug Hose Aluminum Shank, 3 in Nominal, NPSM End Style, Import
Leviton® wire mesh safety grips are built tough to provide the strength, reliability and gripping force required for today's demanding wire management applications. They are designed to distribute stress over a large area so they can securely hold, pull or support the wire, rope, tubing or fiber optic cable to which they are applied. Leviton® wire mesh safety grips are flexible holding devices used to pull cable, rope or tubing into place, to support it after it has been installed, to prevent cable pullout or to provide strain relief that reduces the arc of bend at points of wire connections or terminations. Available in a wide selection of style, weave, attachment and wire options designed to meet the highest standards for strength, flexibility, durability and longevity.
HCI Preferred Supplier 0304C6 Cap Nut, JIC Thread, 3/8 in x 9/16-18 Thread, Straights Steel
HCI Preferred Supplier 0304C6 Cap Nut, JIC Thread, 3/8 in x 9/16-18 Thread, Straights Steel
