C-400-S-51/ALTO 400-w Mogul Base Hi-pressure
400-W MOGUL BASE HI-PRESSURE SODIUM-BULC400S51/ALTO >
Recently Viewed
400-W MOGUL BASE HI-PRESSURE SODIUM-BULC400S51/ALTO >
Morse® 131971 MHSTK Hole Saw, 4/5 in Dia, 1-15/16 in D Cutting, Carbide Cutting Edge, 1/2 to 20 Arbor
WATER CUPS-SOL44>
Milwaukee® 49-57-8317 Quick-Change Hole Saw Cutter, 1-7/32 in Dia, 3/16 in D Cutting, Carbide Cutting Edge
For materials up to 3/16 in., these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2-1/4 in. diameter.
JASSPA1800>
Dichtomatik N70350 O-Ring, 350 Dash Number, 4.6 in ID x 5.02 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
