Dichtomatik N70350 O-Ring, 350 Dash Number, 4.6 in ID x 5.02 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
-
BrandDichtomatik
-
Manufacturer Part NumberN70350
-
CountryUSA
-
Temperature Rating40 to 120 deg F
-
MaterialNitrile Rubber
-
ColorBlack
-
Inside Diameter4.6 in
-
Domestic/ImportImport
-
Durometer70 Shore A
-
Outside Diameter5.02 in
- Good chemical resistance to mineral oils and greases
- The physical and chemical resistance properties of NBR materials are determined by the acrylonitrile (ACN) content of the base polymer which can vary between 18 and 50%
- Low ACN content ensures good flexibility at low temperatures, but offers limited resistance to oils and fuels
- As the ACN content increases, the low temperature flexibility reduces and the resistance to oils and fuels improves
- Physical and chemical resistance properties of NBR materials are also affected by the cure system of the polymer
- Peroxide cured materials have improved physical properties, chemical resistance and thermal properties as compared to sulfur-donor-cured materials
- Standard grades of NBR are typically resistant to mineral oil-based lubricants and greases, many grades of hydraulic fluids, aliphatic hydrocarbons, silicone oils and greases and water to about 80 deg C
- NBR is generally not resistant to aromatic and chlorinated hydrocarbons, fuels with a high aromatic content, polar solvents, glycol based brake fluids and non-flammable hydraulic fluids (HFD)
- NBR also has low resistance to ozone, weathering and aging, but in many applications this has no negative effect
-
UNSPSC31401503
-
Standards/ApprovalsDNV Approved|FDA Compliant|ISD Certified|NFPA Listed|PTDA Certified
Recently Viewed
Dichtomatik N70350 O-Ring, 350 Dash Number, 4.6 in ID x 5.02 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
7000-LB DROP LEG TOP WIND TRAILER JACK - HBC190500 >
Southwire® 3533SW3323 Type SPT-3 Air Conditioner Cord, 125 V AC, (3) 14 AWG Bare Stranded Copper Conductor, 9 ft L
This 14/3 Replacement Cord is designed for heavy-duty use. It features a right-angled, grounded plug that provides extra protection for your appliances. This sturdy plug has a capacity of 125 volts, 15 amps, and 1875 watts. Additionally, its light tan color blends into almost any space.
24-TOOTH #80-1 CHAIN SPROCKETS IDC 80-B-24-F-1-5/8
24-TOOTH SPROCKET FOR #80-1 CHAIN
Reelcraft 100-FOOT 12-AWG 20-A EXT/CORD REEL REC L-70100-123-X
Reelcraft's series L 70000 cord reels incorporate a heavy duty base design, all steel construction and a baked on powder coat finish to produce a rugged, corrosion-resistant product. A newly redesigned latching mechanism provides longer service life of the latch components. The containerized drive spring offers safer and easier handling during maintenance. Two sealed ball bearings produce a smoother spool rotation and easier operation. The guide arm adjusts to seven positions for various mounting locations and applications.
The United Abrasives/SAIT Sait Z-Techâ„¢ grinding wheels offer high performance grinding for the toughest applications. The Z-Techâ„¢ grinding wheels are composed of tough zirconium grain and internally reinforced with the highest quality fiberglass for maximum safety. Proudly manufactured in the USA.
