Leviton® 13353-N Standard Lampholder, 660 W Lamp, 600 V AC, G13 Lamp
Leviton® 13353-N Standard Lampholder, 660 W Lamp, 600 VAC, Medium Bi-Pin Fluorescent Lamp
-
BrandLeviton®
-
UPC078477084809
-
Manufacturer Part Number13353-N
-
CountryUSA
-
MaterialThermoset
-
ColorWhite
-
TypeStandard
-
Connection TypeQuick-Connect
-
Mounting TypeSlide-On
-
Voltage Rating600 V AC
-
Dimensions1-1/4 in L
-
Lamp Base TypeG13
-
Lamp TypeFluorescent
-
Lamp Wattage660 W
- #6-32 zinc plated nut
- Turn type contact
- 3/8 in wire strip length
- 18 to 20 ga THK panel
- Captive nut screws
- 18 AWG wire size
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 25ML54 |
-
Alternative Part Number7338851
-
UNSPSC39101605
-
IDEA Index ID7338851
-
Package DescriptionEACH
-
Standards/ApprovalsUL File No. E5833|CSA File No. LR5863|NOM 057
-
Warranty1 Year Limited
-
Specification Sheet
Recently Viewed
Leviton® 13353-N Standard Lampholder, 660 W Lamp, 600 VAC, Medium Bi-Pin Fluorescent Lamp
MINI-PULLER, 1/2" TON 0R 1,100LB LOAD CAPACITY, VERY COMPACT & LIGHTWEIGHT, LOW PULLING FORCE REQUIRED FOR OPERATION, 5FT LIFT-HRHLX0055 >
1-15/16" -ID 2-B PILLOW BLOCK UNIT-BRWSPB1100EX115/16 >
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. A matching high shoulder is often on the opposite side of the inner ring as well. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. This ball bearing has a 40 deg contact angle. This bearing has a stamped steel cage and is not available with seals or shields. These bearings are non-separable. These bearings have normal tolerances and are not suitable for mounting adjacent to each other to achieve a preload.
1-7/16" -ID PILLOW BLOCK UNIT-BRWPB950EX17/16 >
21-T SPROCKETS FOR #35 CHAIN IDC 35-B-21-F-3/4
21 TOOTH SPROCKETS FOR #35 CHAIN

