Compressed Air Sprayers
Chapin® 1949 Concrete Open Head Sprayer, 3.5 gal, 0.5 to 1 gpm, 40 to 60 psi, 48 in Hose Length, Tri-poxy® Steel Tank
The Chapin® industrial FKM concrete sprayer has a 3.5 gal Tri-Poxy® lined steel tank that provides triple protection against rust, corrosion and damage from denting. Featuring a large 4 in mouth opening for easy filling and cleaning, brass wand, brass shut-off, brass fan tip nozzle for even coverage, a 48 in reinforced hose with threaded fittings and FKM seals for most concrete sealer applications (check chemical manufacturers instructions before use). Our open head tanks have a unique tri-lock seal that insures the pump cap locks tightly into place.
Chapin® 1949 Concrete Open Head Sprayer, 3.5 gal, 0.5 to 1 gpm, 40 to 60 psi, 48 in Hose Length, Tri-poxy® Steel Tank
The Chapin® industrial FKM concrete sprayer has a 3.5 gal Tri-Poxy® lined steel tank that provides triple protection against rust, corrosion and damage from denting. Featuring a large 4 in mouth opening for easy filling and cleaning, brass wand, brass shut-off, brass fan tip nozzle for even coverage, a 48 in reinforced hose with threaded fittings and FKM seals for most concrete sealer applications (check chemical manufacturers instructions before use). Our open head tanks have a unique tri-lock seal that insures the pump cap locks tightly into place.
Recently Viewed
9/16" 12-PT 1/2"-DR SOCKET-ARS12118A>
Milwaukee® M12 FUEL™ 49-16-2556 Protective Tool Boot, For Use With M12 FUEL™ 2556-20 1/4 in Ratchet
The Milwaukee 49-16-2556 tool boot is for use with Milwaukee M12 FUELâ„¢ 1/4 in. ratchet (2556-20) only. This product provides a lightweight, durable solution that is meant to protect the tool and work surface. A durable rubber design will withstand corrosive materials commonly found in maintenance environments. Not for use on or near live electrical circuits. Use on any other product may result in damage to tool motor and may void tool warranty.
Set contains 6 Point extra thin wall deep sizes 3/4" to 1-1/16" and 17mm to 23mm plus two flip sockets 3/4" x 13/16" and 19mm x 21mm. The extra thin wall design allows easy access to recessed wheel nuts where space is limited. Due to the extra thin wall design; they should only be used on wheel nuts where limited torque is applied. For use only with 1/2" drive tools. DO NOT use reducing adapters. Extra Thin Wall Impact Sockets are not covered by the Gp Warranty.
Set Contains 12 Pieces | 1/2" Drive 12 Piece Extra-Thin Wall Set | Molded Storage Case | Weight: 8 lbs. | No Warranty
1/4" REGULATOR AIR FILTER-JETJSB2021>
Proto® J86B Cold Chisel Set, Cold Style, 5/16 to 7/8 in Chisel, 7 Chisels, 7 Pieces
THIS ARC ABRASIVES HARDWARE IS SPECIFICALLY DESIGNED FOR USE WITH OUR QUICK-LOK DISCS
-ARC50251 >
