Cordless Leaf Blowers & Vacuums
Milwaukee® M18™ FUEL™ 2724-20 Cordless Handheld Blower, 450 cfm Air Flow, 120 mph Air Velocity, 18 VDC 9 Ah Li-Ion Battery
The M18 FUEL™ blower has the power to clear from 15 ft, gets to full throttle in under 1 second, and is up to 4 lbs lighter than competitors. Designed to meet landscape maintenance professional needs, the POWERSTATE™ brushless motor and REDLITHIUM™ HIGH DEMAND™ 9.0 battery (sold separately) deliver 450 CFM and 120 mph output. The blower features a variable speed trigger and high/low speed settings for increased control. The high setting is for the most demanding applications and low is optimized for clearing debris from flower beds without moving mulch. The lock on button allows the blower to be locked on to full throttle, so the operating hand can be relaxed reducing fatigue. The M18 FUEL™ blower is fully compatible with 150+ solutions on the M18™ system.
Milwaukee® M18™ 0884-20 Compact Blower, 160 mph Air Flow, 18 V DC Li-Ion Battery
The M18 Compact Blower is a versatile cordless blower built for maintenance professionals, repairmen, remodelers, electricians, cabinet installers, woodworkers and general contractors. This cordless blower is engineered with excellent power-to-weight ratio and longer battery run time. Powered by the M18 lithium-ion battery, the M18 Compact Blower is the perfect addition to any kit, tool bag or work shop. Battery and charger sold separately.
Milwaukee® 2824-20 M18 FUEL Dual Battery Blower, 600 cfm Air Flow, 145 mph Air Velocity, Li-Ion Battery
The MILWAUKEE® M18 FUEL™ Dual Battery Blower meets the performance, durability, and ergonomic needs of landscape maintenance professionals. This blower provides the Highest Constant Power by delivering a power output higher than all handheld gas blowers and maintaining that power level throughout the full charge of the battery. The POWERSTATE™ Brushless Motor delivers 600 CFM and 145 MPH, providing the ability to take on demanding applications like clearing wet leaves. The advanced electronic package allows the blower to reach Full Throttle in Under One Second, boosting control and productivity. The ambidextrous variable speed sliding lock on lever provides the ability to easily lock in the blower to the desired clearing power. This speed control mechanism, combined with the optimized balance, provides the Best Clearing Control in its class. MILWAUKEE® REDLINK PLUS™ Intelligence has total system communication between the tool and battery for unmatched levels of performance, protection, and productivity. This battery-powered blower is compatible with our tapered, flat nozzle, and gutter attachment, providing the ability to optimize airflow for different applications. The blower requires (2) M18™ REDLITHIUM™ Batteries for operation and is optimized to be used with M18™ REDLITHIUM™ HIGH OUTPUT™ batteries. The M18 FUEL™ Dual Battery Blower is part of the M18™ System, fully compatible with over 200 solutions.
Black&Decker 60-VOLT LI-ION LEAF BLOWER KITS BD- DC-BL-770-X-1
The FLEXVOLT 60V MAX Handheld Blower powers through debris at 129 MPH. Battery powered leaf blower features a variable speed trigger and speed lock for total power control, and its lightweight and ergonomic design maximizes control and minimizes stress on your arms. This cordless leaf blower kit contains a FLEXVOLT 20V/60V MAX 9.0Ah battery that powers 60V MAX tools or it can be backwards compatible to work with 20V MAX tools.
Black&Decker 20-VOLT-DC C/LESS LEAF BLOWER KITS BD- DC-BL-722-P-1
The 20V MAX* brushless handheld blower provides the ability to clear debris with an air volume of up to 450 cubic feet per minute and up to 125 miles per hour with the concentrator nozzle. With a lightweight and ergonomic design, the blower gives users directional control and tackles user fatigue. The variable speed trigger and speed lock give you full power control.
Black&Decker 20-V C/L BARE TOOL COMPACT BLOWERS BD- DC-E-100-B
This 20V MAX* Cordless Blower is ideal for clearing debris from the ground and overhead. A 3-speed design offers versatility for a range of jobs, while its compact profile makes it perfect for use in tight spots. This blower is part of the 20V MAX* System of products.
Recently Viewed
IKO IRB1412 Inch Series Inner Ring, 7/8 in ID x 1-1/8 in OD, 19.43 mm OAW, For Use With BA1812Z/BHA1812Z and YB1812 Shell Type Needle Roller Bearing, High Carbon Steel
Inner Rings can be integrated with shell-type or various machined needle roller bearings to provide good roller support without worrying about premature shaft wear. We heat-treat and grind our Inner Rings to tight tolerances to create hard, tough raceways for applications where it is impossible to make shaft surfaces to a specific hardness or roughness attribute. They're an economical alternative to bushings because they don't require any additional machining. Wide Inner Rings are also available to accommodate shafts that move axially or seals that are adjacent to bearings. Inner Rings come in a broad range of shaft diameters and assembly elements include small chamfers or gentle taper relief options. These rings are designed to provide a durable surface for shell-type needle roller bearings with non-machined raceways in-type IRB series shaft diameters range from 5/16 to 2-1/2 in.
2-1/2" -NATIONAL PIPE THREAD BRASS BALL VALVE-FTG21/2BBV >
COILHOSE PNEUMATICS PRODUCTS CL-3101-10-08 10-MM X 1/2"-BSPP Male Connectors
CL31011008 by Coilhose | COILOCK Metric Push-To-Connect Fitting | Male Connector | 10mm Tube OD x 1/2" Male BSPP | Straight | Nickel-Plated Brass
QO and QOB one, two and three pole thermal magnetic circuit breakers provide overcurrent protection and switching on ac and dc systems. These circuit breakers have an over center, trip free toggle mechanism with quick make, quick break action and positive handle indication. They also have VisiTrip trip indication, which provides a visual indication that the circuit breaker has tripped and interrupted the circuit. A full line of features and factory installed accessories are also available such as shunt trips, auxiliary switches and alarm switches. This 1 pole QO circuit breaker is rated at 30A at 120VAC. This unit provides 10kA breaking capacity and plug in mounting. This product includes a 6mA ground fault A with pigtail. QO circuit breakers are UL Listed under UL File E84967 and are CSA Certified under CSA Master Contract 153555.
Browning® 1170133 Single Strand Split Taper Bushed Type 4 Roller Chain Sprocket, 1/2 in Dia Bore, 6.175 in OD, #40 Chain, 37 Teeth, Steel
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
Browning® 1170323 Single Strand Split Taper Bushed Type 4 Roller Chain Sprocket, 3/4 in Dia Bore, 15.573 in OD, #40 Chain, 96 Teeth, Steel
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.