Garden Stakes & Plant Supports
4" X 5" FLAG 21" SHAFT FLUORESCENT ORANGE-BKB451WF >
15" YELLOW SURVEY FLAGS 2-1/2" X 3-1/2"-BKB235WY >
15" WHITE SURVEY FLAGS 2-1/2" X 3-1/2"-BKB235WW >
15" RED SURVEY FLAGS 2-1/2" X 3-1/2"-BKB235WR >
15" ORANGE SURVEY FLAGS 2-1/2" X 3-1/2"-BKB235WO >
15" GREEN SURVEY FLAGS 2-1/2" X 3-1/2"-BKB235WG >
15" FLUORESCENT RED SURVEY FLAGS 2-1/2" X 3-1/2"-BKB235WFR >
15" BLUE SURVEY FLAGS 2-1/2" X 3-1/2"-BKB235WB >
21" ORANGE SURVEY FLAGS 2-1/2" X 3-1/2"-BKB231WO >
36" SURVEY STAKES-BKB1X36SURVEYSTAKE >
24" SURVEY STAKES-BKB1X24SURVEYSTAKE>
Recently Viewed
Proto® JPCL2SS Metal Ring Tool Collar and Loop, For Use With 0.156 to 0.25 in Dia Rotating Tool, Tool Lanyard and Tether
Proto® JPCL2SS Metal Ring Tool Collar and Loop, For Use With 0.156 to 0.25 in Dia Rotating Tool, Tool Lanyard and Tether
DOUBLE SHIELDED BALL BEARING-MRSR8ZZ>
Browning® 1296524 T55L Automatic Torque Limiter, 1-3/8 in Finished Bore, 5-1/2 in OD, 3800 in-lb (1-Spring)/6800 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Dichtomatik N70135 O-Ring, 135 Dash Number, 1.925 in ID x 2.131 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
BBI 451041 Fully Threaded Cap Screw, 1-1/4-12, 3 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 451041 Fully Threaded Cap Screw, 1-1/4-12, 3 in L Under Head, 8 Grade, Alloy Steel, Plain
BBI 500032 Full Thread Tap Bolt, 1/4-20, 3-1/2 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
BBI 500032 Full Thread Tap Bolt, 1/4-20, 3-1/2 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
