Knipex® 74 21 250 SBA High Leverage Diagonal Cutting Plier With Integrated Forged Joint Axle, 4.6 mm Medium Hard Wire Nominal, 1 in L x 1-1/8 in W Steel Beveled Jaw, 250 mm OAL
Knipex® 74 21 250 SBA High Leverage Diagonal Cutting Plier With Integrated Forged Joint Axle, 4.6 mm Medium Hard Wire Nominal, 1 in L x 1-1/8 in W Steel Beveled Jaw, 250 mm OAL
-
BrandKnipex®
-
UPC843221000400
-
Manufacturer Part Number74 21 250 SBA
-
CountryUSA|Canada
-
ColorRed
-
TypeHigh Leverage
-
Handle MaterialPlastic Coated
-
Handle TypeDipped/Pistol Grip
-
Nominal Capacity4.6 mm Medium Hard Wire
-
Applicable MaterialsAluminum, Copper
-
Jaw MaterialSteel
-
Jaw Size1 in L x 1-1/8 in W
-
Jaw TypeBeveled
-
Overall Length250 mm
- For very tough, continuous use
- High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio
- Precision cutting edges additionally induction hardened, cutting edge hardness approximately 64 HRC, for all sorts of wire including piano wire
- Chrome vanadium heavy duty steel, forged, multi-stage oil hardened
- 20% less effort required compared to conventional diagonal cutters of the same length
-
UNSPSC27112114
-
Standards/ApprovalsRoHS|ARRA|Buy American Act Compliant
-
Catalog
-
Specification Sheet
Recently Viewed
Knipex® 74 21 250 SBA High Leverage Diagonal Cutting Plier With Integrated Forged Joint Axle, 4.6 mm Medium Hard Wire Nominal, 1 in L x 1-1/8 in W Steel Beveled Jaw, 250 mm OAL
Knipex® 74 21 250 SBA High Leverage Diagonal Cutting Plier With Integrated Forged Joint Axle, 4.6 mm Medium Hard Wire Nominal, 1 in L x 1-1/8 in W Steel Beveled Jaw, 250 mm OAL
Channellock® 437 High Leverage Diagonal Cutting Plier, 0.05 to 0.09 in Piano Wire, 0.04 to 0.09 Hard Wire, 0.04 to 0.09 Medium Hard Wire, 0.16 in Soft Wire, 1 in L x 0.94 in W x 0.49 in THK Box Joint/Oval C1080 High Carbon Steel Jaw, 7 in OAL, Flush Cut
Channellock® 437 High Leverage Diagonal Cutting Plier, 0.05 to 0.09 in Piano Wire, 0.04 to 0.09 Hard Wire, 0.04 to 0.09 Medium Hard Wire, 0.16 in Soft Wire, 1 in L x 0.94 in W x 0.49 in THK Box Joint/Oval C1080 High Carbon Steel Jaw, 7 in OAL, Flush Cut
Klein® D257-4 Long Tapered Nose Electronics Hot-Riveted Midget Cutting Plier, 0.5 in L x 0.438 in W x 0.5 in THK Tool Steel Short Jaw, 4-1/4 in OAL, Semi-Flush Cut
These Electronics Pliers have a tapered nose for easy working in confined areas and close tip cutting. The short jaws have beveled edges for semi-flush cutting of wire. The induction hardened cutting knives and hot-riveted joint ensure smooth action and long life. Forged of custom, US-made tool steel for maximum durability.
Klein® D232-8 End Cutting Plier, 11/16 in Nominal, 3/8 in L x 1.188 in W x 19/32 in THK Jaw Steel Jaw, 8-1/2 in OAL
These End-Cutting pliers feature wide throat clearance for clean, even, close range cutting of wire or nails. The handles are extended for longer reach and increased leverage. Forged in the USA of forged steel for maximum durability.
Klein® D209-4C Long Pointed Nose Electronics Hot-Riveted Midget Pointed Cutting Plier, 0.5 in L x 0.438 in W x 0.5 in THK Tool Steel Short Jaw, 4-1/4 in OAL, Semi-Flush Cut
Klein Tools' 4-Inch Electronics Pliers offer added comfort for cutting applications that demand precision and control. Its sharp, pointed nose is designed for precise tip cutting and trimming of printed circuit boards. Spring-loaded cutting action and semi-flush cutting blades make this an essential tool for precision work.
Greenlee® 645-1-3/8 Quick-Change Hole Cutter, 1-3/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
Greenlee® 645-1-3/8 Quick-Change Hole Cutter, 1-3/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge, 3/8 in Arbor
