7580 RUBBERMAID COMMERCIAL PRODUCTS
35-QT YELLOW MOP BUCKET & WRINGER-RBM7580>
Recently Viewed
35-QT YELLOW MOP BUCKET & WRINGER-RBM7580>
Greenlee® 825-1-3/8 Variable Pitch Hole Saw, 1-3/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor
Greenlee® 825-1-3/8 Variable Pitch Hole Saw, 1-3/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Browning® offers an extensive multi-groove sheave offering. This includes Browning® Split-Taper® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time our exclusive B5V® sheaves have a patented design that offers 5V horsepower in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
WaterWeld™ will plug or seal leaks and patch holes and cracks in almost anything. Ideal for repairing plumbing, fuel tanks, tub and shower, drains, pool and spa, boats and potable water tanks, setup occurs even under water. After curing, it can be drilled, tapped, filed, sanded and painted. WaterWeld™ has a set time of 15 to 25 min and sets hard in one hour. WaterWeld™ cures to an off white color, is rated at a tensile strength of 900 psi and will withstand temperatures up to 300 deg F.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
