7-Y/2636-3-Y IMPACT PRODUCTS
26/35-QT YELLOW MOP BUCKET WITH WRINGER-IPT 7Y/26363Y>
Recently Viewed
7-Y/2636-3-Y IMPACT PRODUCTS
26/35-QT YELLOW MOP BUCKET WITH WRINGER-IPT 7Y/26363Y>
Dodge® 131842 209 Normal Duty Pillow Block Ball Bearing Unit, 1-5/8 in Dia Bore, 5.5 to 6.19 in L Bolt Center-to-Center, 2.06 in Base to Bore Centerline, 7.44 in OAL x 4.21 in OAH
For more than 70 years, Dodge® has been talking to mounted bearing users and listening to their needs. This experience led to design of the optimum mounted ball bearings. The result is the Dodge® SXR line, the most current eccentric collar mounted ball bearing design on the market, provides the user unmatched quality and true total value.
DeWALT® 07589-PWR Bantam Plug™ Light Duty Bantam Plug Wall Anchor, #14 to #16 Dia, 5/16 in Drill, #14 to #16 Screw, 1-1/2 in OAL, Engineered Plastic
The bantam plug is a plastic anchor designed for use with lightweight fixtures. It can be used in concrete, block and brick. It is also suggested for use in wallboard. Holding values in wallboard tend to be inconsistent, other wall anchors may be considered depending on the application. The bantam plug anchor is injection molded from an engineered plastic and is designed to be used in conjunction with a sheet metal or wood screw. These fasteners are not recommended for use overhead or applications where holding values are critical.
Dixon® 3790806C Reducing Hex Nipple, 1/2 x 3/8 in x 1-5/8 in L, Brass, MNPT, Domestic
Dixon® 3790806C Reducing Hex Nipple, 1/2 x 3/8 in x 1-5/8 in L, Brass, MNPT, Domestic
3/4" X 30-YARDS GREEN FINGER TAPE-MOD110075 >
Sealmaster® 700327 Non-Expansion Standard Duty Ball Bearing Cartridge With Seal Flinger, 1-7/16 in Dia Bore, 3-7/8 in OD, 1-11/16 in W, 5782 lb Dynamic/3493 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
