Z-Rags WR5200W-50 Reclaimed Cotton Sheet Rag, White
Z-Rags WR5200W-50 Reclaimed Cotton Sheet Rag, White
-
BrandZ-Rags
-
Manufacturer Part NumberWR5200W-50
-
CountryUSA
-
Capacity50 lb
-
ColorWhite
-
TypeReclaimed
-
Package TypeBox
- Economical, absorbent and good for general purpose wiping applications
- Sold in bulk by weight
- Derived from clothing that is sorted and cut in to rags
- Rags are scanned for metal to ensure safety
-
UNSPSC47131501
-
Specification Sheet
Recently Viewed
Z-Rags WR5200W-50 Reclaimed Cotton Sheet Rag, White
WypAll* 91371 Waterless Cleaning Wipes, 9.5 x 12 in, 75 Sheets Capacity, White/Green
WypAll® Waterless Industrial Cleaning Wipes are the ideal pre-saturated cleaner for on the go cleaning of hands, tools, parts and non-porous work surfaces. The alcohol free natural citrus solvents cut through grease, grime and oil, while soothing ingredients moisturize the skin. The specially designed cleaning fabric incorporates a textured surface on one side to increase scrubbing action for more thorough cleaning (even a tool with grime caked on), while being thin and flexible enough to get into tight spaces. The other side features a smooth surface, which wipes away dirt from your hand or a work surface. The middle absorbent layer soaks up and holds the dirt. These wipers are truly a must have for any dirty job and cleaning on the go. When effectiveness and value top your list of criteria, you can trust WypAll® to deliver.
Champion CT7-1-1/8 Hole Cutter, 1-1/8 in Dia, 1 in D Cutting, Carbide Cutting Edge
Champion SA80-1 Car/Maintenance Reamer, 1 in Dia x 7-3/16 in OAL, 1/2 in Dia Straight Shank, Left Helical Flute
Champion SA80-1 Car/Maintenance Reamer, 1 in Dia x 7-3/16 in OAL, 1/2 in Dia Straight Shank, Left Hand Helix Flute
16-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-16-F1-1/2
16 TOOTH SPROCKETS FOR #60 CHAIN
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
