9538-18 GO-JO INDUSTRIES
500-ML EMERALD HAND CLEANER--CASE OF 18-GOJ953818 >
Recently Viewed
500-ML EMERALD HAND CLEANER--CASE OF 18-GOJ953818 >
Browning® 1296417 T45L Automatic Torque Limiter, 3/4 in Finished Bore, 4-1/2 in OD, 2800 in-lb (1-Spring)/4900 in-lb (2-Spring) Torque
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Proto® offers a wide range of sizes for many types of ends, with innovations like ratcheting splines and flex head sockets. We also offer a wide range of angled and bent offsets to meet specific job applications.
SINGLE GROOVE A-BELT 1-1/8" -ID SHEAVES-IDCAK05111/8 >
1-3/4" -ID FLAT INSERT BEARING-FAFRA112RR >
Inner Diameter (Bore): 50 mm Outer Diameter: 110 mm Width: 27 mm Basic Dynamic Load Rating: 65 kN Basic Static Load Rating: 38 kN Limiting Speed: 8,500 RPM Closure Type: Single metal shield (Z)Internal Clearance: CN (Normal clearance)
