BBI 455461 Partially Threaded Cap Screw, 5/8-11, 7-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455461 Partially Threaded Cap Screw, 5/8-11, 7-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
-
BrandBBI
-
Manufacturer Part Number455461
-
CountryUSA
-
FinishZinc Yellow Bake CR+6
-
Tensile Strength150000 psi
-
MaterialAlloy Steel
-
Material SpecificationASTM B633-Fe, Zn5 Type 2
-
Thread TypeUNC
-
Measurement SystemImperial
-
TypePartially Threaded
-
Grade8
-
Hardness33 to 39 HRC
-
Head Size25/64 in H
-
Head TypeHex
-
Shank Size5/8 in
-
Diameter - Thread Size5/8-11
-
Length Under Head7-1/2 in
-
UNSPSC31161501
-
Package Description10/CS
-
Standards/ApprovalsASME/ANSI B18.2.1
Recently Viewed
BBI 455461 Partially Threaded Cap Screw, 5/8-11, 7-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455461 Partially Threaded Cap Screw, 5/8-11, 7-1/2 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
DOUBLE SHIELDED BALL BEARING
2" -FEMALE PIPE THREAD THREADED SCHEDULE-80 PVC UNION-JWH403865 >
BBI 491008 Fully Threaded Carriage Bolt, 1/4-20, 2 in L Under Head, Medium Carbon Steel, #5 Grade, Plain
BBI 491008 Fully Threaded Carriage Bolt, 1/4-20, 2 in L Under Head, Medium Carbon Steel, #5 Grade, Plain
9.6-VOLT CORDLESS TOOL BATTERY-JWH345095 >
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
