Guardair® MV2000 Machine Vacuum Cleaner, 5.5 gal Container Tank, 73 cfm, 100 psi, 5 hp
Powered by standard shop compressed air, the powerful, portable 5.5 gallon MV2000 MachineVac quickly and effectively sucks up debris, metal chips, dirt, sawdust, and fine materials including powders and talc. Also capable of vacuuming liquids such as machine oils, lubricants, and other fluids. Virtually maintenance-free; no moving parts to wear out. With no electric motor to spark or burn out, the MachineVac eliminates electrical extension cords -potentially dangerous in wet environments and always a tripping hazard. Mounts on any vertical surface, saving valuable factory floor space. Factory installed options include HEPA Filtration.
-
BrandGuardair®
-
UPC690773026378
-
Manufacturer Part NumberMV2000
-
CountryUSA|Canada
-
Filter TypeCartridge
-
Flow Rate73 cfm cfm
-
Air Flow Rate21 cfm
-
Hose Size1-1/2 in ID x 10 ft L
-
Inlet Size3/8 in
-
Sound Level88 dBA dBA
-
Static Pressure100 psi psi
-
Brush TypeRound
-
Tank Capacity5.5 gal gal
-
Tank TypeContainer
- 5.5 gallon chemical resistant polyethylene container, Cartridge filter (77% Efficient at 0.8 Microns), Liquid shut-off and drum drain, 1-1/2 in ID x 10 ft flexible vacuum hose, 1-1/2 in OD x 11 in plastic crevice tool, Predrilled, steel mounting plate, 3/8 in FNPT inlet
- Cartridge filter (77% efficient at 0.8 Microns)
- Liquid shut-off and drum drain
- Pre-drilled, steel vertical mounting plate
- Also capable of vacuuming liquids such as machine oils, lubricants and other fluids
-
UNSPSC47121602
-
Instruction/Installation Manual
Recently Viewed
Guardair® MV2000 Machine Vacuum Cleaner, 5.5 gal Container Tank, 73 cfm, 100 psi, 5 hp
Powered by standard shop compressed air, the powerful, portable 5.5 gallon MV2000 MachineVac quickly and effectively sucks up debris, metal chips, dirt, sawdust, and fine materials including powders and talc. Also capable of vacuuming liquids such as machine oils, lubricants, and other fluids. Virtually maintenance-free; no moving parts to wear out. With no electric motor to spark or burn out, the MachineVac eliminates electrical extension cords -potentially dangerous in wet environments and always a tripping hazard. Mounts on any vertical surface, saving valuable factory floor space. Factory installed options include HEPA Filtration.
Gates® Power Transmission PowerGrip® 465H300 Heavy Timing Belt, 3 in W, 46-1/2 in OAL, 1/2 in Pitch, 93 Teeth, Neoprene
The trapezoidal tooth profile of PowerGrip™ Timing belts offers a maintenance-free and economical alternative to conventional chain drives and is well suited for use in positioning applications.
Crescent® 56128 Long Key Set, 13 Pieces, 1/16 to 1/2 in Hex, L-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
Crescent® 56128 Long Key Set, 13 Pieces, 1/16 to 1/2 in Hex, L-Handle Handle, ASME B18.3, Alloy Steel, Black Oxide
All REED cutter wheels are made from high shock-resistant tool steel, while competitive cutter wheels are made from carbon steel or still lower quality tool steel. By using this higher quality raw material, REED cutter wheels can be made thinner and can therefore cut pipe more easily and leave less burr. Also, because of their higher quality, certified material, only REED cutter wheels can be heat-treated for the perfect balance between hardness and toughness to make REED cutter wheels resist breakage and last longer.
OAK MOLDING SEAM BINDER 36"-M-D85621 >
RIDGID® 32525 Wrench Handle, For Use With: Model C12 2 in Light Duty Chain Wrench
RIDGID® 32525 Wrench Handle, For Use With: Model C12 2 in Light Duty Chain Wrench
