MORSE C/Tool 1-1/2"-6 USS 4-FL TAPER HAND TAPS MCT 32332
MORSE® 32332 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/2-6 Thread, H4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125323325
-
Manufacturer Part Number32332
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length3 in
-
MaterialHSS
-
Thread LimitH4
-
Thread Size1-1/2-6
-
Thread StandardGround/UNC
-
Chamfer TypeTapered
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2046
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Overall Length6-3/8 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | MT3732332 |
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 32332 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-1/2-6 Thread, H4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
2517X1-3/4 1-3/4" -ID 2517-style Taper-lock
Mfr description
2517 X 3/4 TAPER BORE BUSHING
Mounts flush in products - No protruding flanges to interfere with the drive
Key to Key Drive - Capscrews act as an external key
1 1/2"/ft. Taper on Barrel - Since this is a non-self locking taper it provides ease of installation and removal of products from the shaft.
28 TOOTH SPROCKETS FOR #80 CHAIN-IDC80SF28 >
1-1/4" X 1" THREADED REDUCING CONDUIT BUSHING - STEEL-APLRB125100 >
FHP V-BELT (3-L-600) OUTSIDE CIRCUMFERENCE 60."-GAT1600 >
