Milwaukee 12-VOLT LIT-ION DUST EXTRACTOR KIT MWK 2509-22
The M12™ HAMMERVAC™ Universal Dust Extractor Kit is a universal solution for eliminating dust when drilling with any SDS Plus rotary hammer. It is the industry’s only onboard universal dust extractor. The universal side handle allows for operation with any SDS Plus hammer in the industry: corded, cordless, Milwaukee Brand or other. The AUTOPULSE™ filter cleaning mechanism will clean the filter automatically after use, allowing for OSHA Table One Compliance. This extractor allows users to drill up to 8"" in depth and up to 1-1/4"" in diameter with two accessory nozzles designed for small and large diameters. The adjustable depth stop allows for quickly and accurately setting the desired hole depth. The dust box can be emptied with no exposure by hooking it up to a large dust extractor to vacuum out the dust. The tool also features an Auto On/Off Mode that saves time and battery life. The M12™ HAMMERVAC™ runs off of any Milwaukee M12™ REDLITHIUM™ Battery to be a fully self-powered unit.
-
BrandMilwaukee®
-
UPC045242552283
-
Manufacturer Part Number2509-22
-
CountryUSA|Canada
-
Filter TypeHEPA
-
TypeAdjustable Cordless Handheld
-
Voltage Rating12 V
-
SeriesM12™ HAMMERVAC™
-
Housing MaterialPlastic
-
Dimensions19 in L x 8 in W x 7 in H
- Universal design - works on any SDS Plus® rotary hammer
- Allows for drilling up to 8 in D and up to 1-1/4 in Dia
- AUTOPULSE filter cleaning mechanism cleans the dust extractor filter automatically after use
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 61UU78 |
-
Alternative Part Number17585336
-
UNSPSC47121602
-
IDEA Index ID17585336
-
Package DescriptionEACH
-
Standards/ApprovalsOSHA Compliant
-
Warranty5 years for Tool, 2 years for Battery
-
Full Engineering Drawing
-
Service Manual
Recently Viewed
The M12™ HAMMERVAC™ Universal Dust Extractor Kit is a universal solution for eliminating dust when drilling with any SDS Plus rotary hammer. It is the industry’s only onboard universal dust extractor. The universal side handle allows for operation with any SDS Plus hammer in the industry: corded, cordless, Milwaukee Brand or other. The AUTOPULSE™ filter cleaning mechanism will clean the filter automatically after use, allowing for OSHA Table One Compliance. This extractor allows users to drill up to 8"" in depth and up to 1-1/4"" in diameter with two accessory nozzles designed for small and large diameters. The adjustable depth stop allows for quickly and accurately setting the desired hole depth. The dust box can be emptied with no exposure by hooking it up to a large dust extractor to vacuum out the dust. The tool also features an Auto On/Off Mode that saves time and battery life. The M12™ HAMMERVAC™ runs off of any Milwaukee M12™ REDLITHIUM™ Battery to be a fully self-powered unit.
Essentials U1PM150 Bonded Mediumweight Perforated Sorbent Roll, 150 ft L x 30 in W x 1 ply THK, 30 gal Absorption, Meltblown Polypropylene
Essentials U1PM150 Bonded Mediumweight Perforated Sorbent Roll, 150 ft L x 30 in W x 1 ply THK, 30 gal Absorption, Meltblown Polypropylene
5/8" X 2" GOLD HD OVAL DIE SPRINGS-LANSHDO625200 >
Browning® 1073832 Type F Q-D® Bushing, 2-3/16 in Dia Bore, 4-3/8 in Dia Barrel, 6-5/8 in Dia Flange, 3.68 in OAL
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
EATON BRFPP Loadcenter Filler Plate, 3 in L x 1 in W, For Use With Type BR 1 in Loadcenter and Circuit Breaker, Plastic
Specially designed for easy installation, Eaton's BR 1-inch load centers house the branch circuit breakers and the wiring required to distribute power to individual circuits. They serve as main breaker for service entrances or as main lug when adding circuits to existing service. The main breaker protects the entire panel and can be used as a service disconnect. The branch breakers protect the wires leading to individual electrical loads such as fixtures and outlets.
