6407-12-12 DAYCO FITTINGS
12-MB-12-MB HYDRAULIC ADAPTERS-DAY64071212>
Recently Viewed
12-MB-12-MB HYDRAULIC ADAPTERS-DAY64071212>
FiberFix 2 HEAT WRAP Insulative Moisture Resistant Reinforced Heat Wrap, 2 in W x 70 in L, Fiber/Resin, Black
FiberFix 2 HEAT WRAP Insulative Moisture Resistant Reinforced Heat Wrap, 2 in W x 70 in L, Fiber/Resin, Black
Flex-Hone® GBD33418 Heavy Duty Flexible Cylinder Hone, 3-3/4 in Dia Bore, 5 in L Abrasive, 13-1/2 in OAL, 180 Grit
The BRM Flex- Hone® Tool is a resilient, flexible honing tool with a soft cutting action. It's unique construction allows the abrasive globules or "stones" to float, assuring the tool will be self-centering, self-aligning to the bore and self-compensating for wear. The tool is available in a variety of different grits and sizes ranging from 4 mm to 36 in. Whether your need is cross hole deburring, surface finishing or edge blending there is a Flex- Hone® Tool designed for you. A non-directional or crosshatched pattern is created on the surface that contains valuable valleys between the plateaus for oil retention. Finer grits can assist with achieving single RA finishes. In Automotive, Hydraulic, Pneumatic or Industrial applications, the Flex- Hone® Tool will provide a superior surface finish bringing increased product performance, longer product life and less product reject.
BBI 500124 Full Thread Tap Bolt, 3/8-16, 5-1/2 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
BBI 500124 Full Thread Tap Bolt, 3/8-16, 5-1/2 in L Under Head, A Grade, Low Carbon Steel, Zinc CR+3
Milwaukee® 6890 Double Insulated Corded Electric Nibbler, 16 ga Cold Rolled Steel, 18 ga Stainless Steel Cutting, 1-3/4 in Cutting Radius, 1900 spm, 120 V AC/DC, Metal Housing, 11-1/4 in OAL
A nibbler uses a punch and die to make the cut, this is perfect for tight radius cuts into steel. The cutter can be set in 8 positions to make cutting easier. A .87 in. starter hole is all that is needed to start or start from the edge of the material. A nibbler is also what you need if you are cutting corrugated metal. The 6890 nibbler can cut 16 gauge steel and 18 gauge stainless. When perfect cuts are what you need, look to the Milwaukee line of nibblers.
Hillman™ 40126 Wood Screw, #10, 1-1/4 in OAL, Flat Head, Phillips® Drive, Zinc Plated
Hillman™ 40126 Wood Screw, #10, 1-1/4 in OAL, Flat Head, Phillips® Drive, Zinc Plated
