Enerpac® RCH1211 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 12 ton, 2.13 in Bore, 1.63 in L Stroke, 4-3/4 in H Retract, 1.38 in Dia Rod, 10000 psi
Enerpac® RCH1211 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 12 ton, 2.13 in Bore, 1.63 in L Stroke, 4-3/4 in H Retract, 1.38 in Dia Rod, 10000 psi
-
BrandEnerpac®
-
UPC066200530313
-
Manufacturer Part NumberRCH1211
-
CountryUSA
-
Capacity12 ton
-
FinishBaked Enamel
-
Port Size1/4 in
-
Pressure Rating10000 psi
-
TypeHollow Plunger Single Acting Spring Return
-
Retract4-3/4 in H
-
Rod Diameter1.38 in
-
Mounting TypeSurface
-
SeriesRCH
-
Housing MaterialSteel
-
Dimensions2.75 in OD x 6.38 in H
-
Stroke Length1.63 in
-
Bore Size2.13 in
- Hollow plunger design allows for both pull and push forces
- Nickel plated, floating center tube on models over 20 ton increases product life
- Baked enamel finish for increased corrosion-resistance
- Collar threads for easy fixturing
- Features CR-400 coupler
- Have FZ-1630 reducer and AR-630 coupler
- Safely erecting a bridge over water with a hydraulic driven launching nose
- Pre-loading bridge cables with a battery powered hydraulic pump
- Pulling pins on an oil well casing elevator spider
-
UNSPSC27121602
-
Catalog
Recently Viewed
Enerpac® RCH1211 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 12 ton, 2.13 in Bore, 1.63 in L Stroke, 4-3/4 in H Retract, 1.38 in Dia Rod, 10000 psi
Enerpac® RCH1211 Hollow Plunger Single Acting Spring Return Hydraulic Cylinder, 12 ton, 2.13 in Bore, 1.63 in L Stroke, 4-3/4 in H Retract, 1.38 in Dia Rod, 10000 psi
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
ALFAGOMMA® TR1SN-03 TR1SN Single Wire Braid Hydraulic Pipe, Tubing & Hoses, Hose End Style, 3630 psi Working, Synthetic Rubber, Import
ALFAGOMMA® TR1SN-03 TR1SN Single Wire Braid Hydraulic Pipe, Tubing & Hoses, Hose End Style, 3630 psi Working, Synthetic Rubber, Import
Milwaukee Hand Trucks 33800 Hand Truck Furniture Dolly, 1000 lb Load, 6 in H x 30 in W x 18 in D, Wood
Milwaukee Hand Trucks 33800 Hand Truck Furniture Dolly, 1000 lb Load, 6 in H x 30 in W x 18 in D, Wood
9-TOOTH #50-1 CHAIN SPROCKETS IDC 50-B-9-F-3/4
9 TOOTH MINIMUM PLAIN BORE SPROCKETS FOR #50 CHAIN
ASP-622-S Industry Standard Clamping Collar, 2-Piece Construction, 5/8 in ID x 1-5/16 in OD x 7/16 in W, Stainless Steel
Stainless Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
