1-1/2" X 1/8" Aluminum FOR48225
1-1/2" X 1/8" ALUMINUM FLAT STOCK Aluminum flat stock is suitable for most light and medium duty projects. Can be welded using Forney or similar aluminum MIG wire, arc rod, or gas welding specialty rods.
Recently Viewed
1-1/2" X 1/8" ALUMINUM FLAT STOCK Aluminum flat stock is suitable for most light and medium duty projects. Can be welded using Forney or similar aluminum MIG wire, arc rod, or gas welding specialty rods.
1-1/2" X 1/8" X 72 ANGLE STOCK Mild steel angle stock is suitable for most medium to heavy-duty projects. This high quality steel can be welded using Forney or similar MIG wire, arc rod, or gas welding specialty rods.
BBI 497222 Heavy Partially Threaded Structural Bolt, 3/4-10, 2-1/4 in L Under Head, Steel Alloy, Hot Dipped Galvanized
BBI 497222 Heavy Partially Threaded Structural Bolt, 3/4-10, 2-1/4 in L Under Head, Steel Alloy, Hot Dipped Galvanized
Sealmaster® 700044 Non-Expansion Standard-Duty Straight Bore Ball Bearing Insert, 2-7/16 in Dia Bore, 4.3307 in OD, 2-9/16 in W, 11789 lb Dynamic/8150 lb Static Load
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction.
3/4" X 5" SAE GR-5 Hex Head Capscrew
Dichtomatik N3.00X220 O-Ring, 220 mm ID x 226 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
