Crosby® 1032830 HG-228-1 X 18 Turnbuckle, Jaw/Jaw, 1 in Thread, 10000 lb Working, 18 in Take Up, 33.18 in L Close, Steel
Crosby® 1032830 HG-228 Turnbuckle, Jaw/Jaw, 1 in Thread, 10000 lb Working, 18 in Take Up, 33.18 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1032830
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter1 in
-
MaterialSteel
-
Closed Length33.18 in
-
SeriesHG-228
-
Working Load10000 lb
-
End/EndJaw/Jaw
-
Take Up18 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Forged jaw ends are fitted with bolts and nuts for 1/4 in through 5/8 in and pins and cotters on 3/4 in through 2-3/4 in sizes
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b, Type 1, Form 1, Class 7|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1032830 HG-228-1 X 18 Turnbuckle, Jaw/Jaw, 1 in Thread, 10000 lb Working, 18 in Take Up, 33.18 in L Close, Steel
Crosby® 1032830 HG-228 Turnbuckle, Jaw/Jaw, 1 in Thread, 10000 lb Working, 18 in Take Up, 33.18 in L Close, Steel
Deep Groove Ball Bearings (DGBB) are the most common form of rolling bearings and are used in a variety of applications, particularly those where high speeds and low power loss are required. NSK DGBB can handle not only radial forces, but also moderate axial loads in both directions. They are easy to install and can be deployed in a variety of configurations.
10-MM X 1.25X20-MM HEX HEAD CAPSCREW-MET96110020F >
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
Gates® Power Transmission Hi-Power® II A93 Banded Heavy Duty V-Belt, A Section, 1/2 in W Top, 95 in L Outside, 5/16 in THK, EPDM
The wrapped classical section Hi-Power™ V-belt has a long reputation for reliability on agricultural and industrial applications. The arched top of the Hi-Power belt provides superior strength to prevent "dishing" and distortion of the tensile section. The cords are properly aligned, each of them carrying its full share of the load.
Sealmaster® gold mounted ball bearings feature a wide outer race insert bearing with land riding metallic retainer. The black oxide treated bearing steel insert features an exclusive lock pin and dimple system providing a direct path for lubrication into the bearing, and prevents outer ring rotation within the housing. Shaft lock is achieved by either setscrew or Skwezloc® concentric locking collar. The felt seal with flinger provide a good balance between contaminant entry, GoldPlex® HP grease loss and friction. Depending on your preference, these bearings are available in both inch and metric shaft sizes with a wide variety of cast iron, stamped steel or rubber mount housings, sealing, and lubrication options or industry specific solutions.
