Channellock® 360 Multi-Purpose Welders Plier, 2.71 in L, High Carbon Steel Jaw, 8.9 in OAL
Designed as an ideal 6-in-1 plier for welders, the CHANNELLOCK® 360 Welder's Plier offers XLT™ cutting technology which positions the rivet closer to the cutting edge so considerably less force is required to cut than other high leverage designs. Aggressive cross-hatch teeth and precision machined grooves easily grip and draw out wire and provide superior spatter removal. Added spring makes for ideal one-handed use while 90-deg teeth allow for easy tip installation and removal. Pliers are Made in USA and forged from high carbon steel that is specially coated for ultimate rust prevention.
-
BrandChannellock®
-
UPC025582825315
-
Manufacturer Part Number360
-
CountryUSA
-
FinishNatural
-
ColorBlue
-
TypeMulti-Purpose
-
Handle MaterialRubber
-
Jaw Length2.71 in
-
Jaw MaterialHigh Carbon Steel
-
Overall Length8.9 in
- Professional multi-purpose welder's pliers provide strength and reliability on and off the job site
- CHANNELLOCK BLUE® grips for comfort
- CHANNELLOCK® uses high carbon steel for superior performance on the job and specially coated for ultimate rust prevention
- XLT™ Xtreme leverage Technology means considerably less force required to cut than traditional high leverage
- Groove nose design for superior spatter removal
- Easy tip installation and removal
- Grips and draws out wire
- Able to hammer
- Spring loaded
- Precision machined laser Heat treated cutting edges for clean cuts
- Coiled Spring
- 0.45 in joint thickness
- 0.39 in cutting edge
- 0.29 in nose width
- 2 in span handle
- 1.5 in joint width
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | LB50360 |
| Berkshire eSupply | LB50360 |
-
UNSPSC27112100
-
Package DescriptionEACH
-
Standards/ApprovalsISO 9001:2015
Recently Viewed
Channellock® 360 Multi-Purpose Welders Plier, 2.71 in L, High Carbon Steel Jaw, 8.9 in OAL
Designed as an ideal 6-in-1 plier for welders, the CHANNELLOCK® 360 Welder's Plier offers XLT™ cutting technology which positions the rivet closer to the cutting edge so considerably less force is required to cut than other high leverage designs. Aggressive cross-hatch teeth and precision machined grooves easily grip and draw out wire and provide superior spatter removal. Added spring makes for ideal one-handed use while 90-deg teeth allow for easy tip installation and removal. Pliers are Made in USA and forged from high carbon steel that is specially coated for ultimate rust prevention.
Heritage™ BP-215 Imperial Bridge Pin, 0.125 in Dia x 1-9/16 in L, Fits Shaft 1/2 to 3/4 in, MB Spring Wire, Zinc Clear
Heritage™ BP-215 Imperial Bridge Pin, 0.125 in Dia x 1-9/16 in L, Fits Shaft 1/2 to 3/4 in, MB Spring Wire, Zinc Clear
1-GALLON GEN/PURPOSE FLOOR CLEANER-JWH605522 >
BBI 699502 Screw
Anvil® 0310085006 FIG 1125 Reducer, Coupling, 3/8 x 1/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
DIXON GLS-435 Liquid Filled Pressure Gauge, 0 to 1000 psi, 1/4 in Connection, 2-1/2 in Dial, +/- 1.5% Full Scale
Liquid filled gauges enhance the reliability and integrity of the measuring system for long periods. The glycerine filling helps dampen the effects of vibration and pulsation. It also lubricates the movement which extends the life of the gauge. ALL CONNECTIONS ARE BRASS.
