Crosby® 1031715 HG-226-1-1/2 X 18 Turnbuckle, Eye/Eye, 1-1/2 in Thread, 21400 lb Working, 18 in Take Up, 40.74 in L Close, Steel
Crosby® 1031715 HG-226 Turnbuckle, Eye/Eye, 1-1/2 in Thread, 21400 lb Working, 18 in Take Up, 40.74 in L Close, Steel
-
BrandCrosby®
-
Manufacturer Part Number1031715
-
CountryUSA
-
FinishHot Dipped Galvanized
-
Thread Diameter1-1/2 in
-
MaterialSteel
-
Closed Length40.74 in
-
SeriesHG-226
-
Working Load21400 lb
-
End/EndEye/Eye
-
Take Up18 in
- End fittings are quenched and tempered or normalized, bodies heat treated by normalizing
- Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimize stress in the eye
- Modified UNJ thread on end fittings for improved fatigue properties
- Body has UNC threads
- Importantly, these turnbuckles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
-
UNSPSC31162405
-
Standards/ApprovalsFederal Spec FF-T-791b/Type 1/Form 1/Class 4|ASTM F-1145|ASME B30.26
-
Catalog
Recently Viewed
Crosby® 1031715 HG-226-1-1/2 X 18 Turnbuckle, Eye/Eye, 1-1/2 in Thread, 21400 lb Working, 18 in Take Up, 40.74 in L Close, Steel
Crosby® 1031715 HG-226 Turnbuckle, Eye/Eye, 1-1/2 in Thread, 21400 lb Working, 18 in Take Up, 40.74 in L Close, Steel
BBI 087524 Partially Threaded Cap Screw, 3/4-10, 4 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
BBI 087524 Partially Threaded Cap Screw, 3/4-10, 4 in L Under Head, 5 Grade, Carbon Steel, Zinc CR+3
Browning® 1045293 VP Series Type 1 Variable Pitch Sheave, 7/8 in Finished Bore, 3.15 in OD, 1 Groove, 1.7 to 2.5 in (3L)/2 to 3 in (A/4L)/2.5 to 3.3 in (B/5L) Dia Pitch, 21/32 to 1 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
Wilton® WL9-86680 Classic™ Heavy Duty F-Clamp, 5/3/2004 in D Throat, 24 in Clamping
The Wilton® Classic Series F-Clamps are among the first of their kind. With a timeless design, this series is an industry favorite. Heavy-Duty F-Clamps feature a clamping force of 2660 lbs, a heavy-duty replaceable pad and replaceable parts.
Browning® 3750312 Taper Bore Bushing, 2-9/16 in Dia Bore, 4-1/4 in Dia Barrel, 2 in OAL
