S-MD-R-750-300 3/4" X 3" Blue Md Rect
3/4" X 3" BLUE MD RECT DIE SPRINGS-LANSMDR750300 >
Recently Viewed
3/4" X 3" BLUE MD RECT DIE SPRINGS-LANSMDR750300 >
Dodge® 071128 115 Imperial Type E Pillow Block Roller Bearing Unit, 2 in Dia Bore, 6.88 to 7.12 in L Bolt Center-to-Center, 2-1/4 in Base to Bore Centerline, 8.87 in OAL x 4.47 in OAH
Dodge® imperial spherical roller bearings are the only high-capacity double-row spherical roller bearings with an effective easy-on, easy-off adapter mounting and removal system. Not only does this patented system provide a concentric grip for superior holding on the shaft, but it reduces the fretting corrosion caused by traditional setscrews and vibration.
Browning® 3749892 Taper Lock Bushing, 1-1/2 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
Browning® 3749892 Taper Lock Bushing, 1-1/2 in Dia Bore, 3-3/8 in Dia Barrel, 2-1/2 in OAL, Steel
CGW® 70125 Coated Abrasive Flap Disc, 4-1/2 in Dia, 320 Grit, Very Fine Grade, Silicon Carbide Abrasive, Type 29 Conical Disc
CGW® 70125 Coated Abrasive Flap Disc, 4-1/2 in Dia, 320 Grit, Very Fine Grade, Silicon Carbide Abrasive, Type 29 Conical Disc
The Mag-Torch® MT 579 is a high performance silver swirl MAP-Pro™ torch that delivers an extreme swirl flame, it has an on demand trigger giving you instant ignition and flame shut off. This torch has a safety trigger lock to prevent unwanted ignition and it also has a trigger lock for continuous flame setting. This torch can solder upto 2 in of copper.
Browning® 1296391 Automatic Torque Limiter, 1 in Straight Bore, 3-1/2 in OD, 1800 in-lb (1 Spring)/3000 in-lb (2 Spring) Torque
Browning® torque limiters are torque control devices that slip under excessive load but automatically carry the desired load after the excess has been removed. The device can be easily adjusted to slip at a desired overload and automatically re-engage when overload is removed. Overload should be removed promptly since prolonged slippage can be detrimental to the friction disc. Generally, no resetting is required after the torque limiter has slipped. Torque limiters help prevent machine and product damage and costly downtime caused by shock loads, overloads or machine jams but should not be used as clutches.
