Door & Gate Springs
5/8" X 1-3/4" M/D OVAL DIE SPRINGS-LANSMDO625175 >
5/8" X 1-1/2" M/D OVAL DIE SPRINGS-LANSMDO625150 >
5/8" X 1-1/4" M/D OVAL DIE SPRINGS-LANSMDO625125 >
5/8" X 1" M/D OVAL DIE SPRINGS-LANSMDO625100 >
1/2" X 3-1/2" M/D OVAL DIE SPRINGS-LANSMDO500350 >
1/2" X 3" M/D OVAL DIE SPRINGS-LANSMDO500300 >
1/2" X 2-1/2" M/D OVAL DIE SPRINGS-LANSMDO500250 >
1/2" X 2" M/D OVAL DIE SPRINGS-LANSMDO500200 >
1/2" X 1-3/4" M/D OVAL DIE SPRINGS-LANSMDO500175 >
1/2" X 1-1/2" M/D OVAL DIE SPRINGS-LANSMDO500150 >
1/2" X 1-1/4" M/D OVAL DIE SPRINGS-LANSMDO500125 >
1/2" X 12" M/D OVAL DIE SPRINGS-LANSMDO5001200 >
1/2" X 1" M/D OVAL DIE SPRINGS-LANSMDO500100 >
3/8" X 3" M/D OVAL DIE SPRINGS-LANSMDO375300 >
3/8" X 2-1/2" M/D OVAL DIE SPRINGS-LANSMDO375250 >
3/8" X 1-1/2" M/D OVAL DIE SPRINGS-LANSMDO375150 >
3/8" X 1" MED/DUTY OVAL DIE SPRING-LANSMDO375100 >
1-1/4" X 4" M/D OVAL DIE SPRINGS-LANSMDO1250400 >
1-1/4" X 3-1/2" OVAL DIE SPRINGS-LANSMDO1250350 >
1-1/4" X 2-1/2" M/D OVAL SPRINGS-LANSMDO1250250 >
1" X 3" M/D OVAL DIE SPRINGS-LANSMDO1000300 >
1" X 2-1/2" M/D OVAL DIE SPRINGS-LANSMDO1000250 >
1" X 2" M/D OVAL DIE SPRINGS-LANSMDO1000200 >
1" X 1-3/4" M/D OVAL DIE SPRINGS-LANSMDO1000175 >
Recently Viewed
WATTS® 0063010 009 Inline Reduced Pressure Zone Assembly, 2 in Nominal, NPT End Style, Quarter-Turn Ball Valve, Bronze Body, Reduced Pressure Zone, 7.5 fps Flow Rate
Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to back siphon age and or backpressure. It consists of bronze body construction (1/4 to 2 in, 8 to 50 mm) or FDA approved epoxy coated cast iron (2-1/2 to 3 in, 65 to 80 mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements.
