Door & Gate Springs
5/8" X 2" YELEX TRA HEAVY RECT DIE SPRINGS-LANSEHR625200 >
5/8" X 1-1/2" EXTRA HEAVY RECT DIE SPRINGS-LANSEHR625150 >
5/8" X 1" YELEX TRA HEAVY RECT DIE SPRINGS-LANSEHR625100 >
1/2" X 2-1/2" EXTRA HEAVY RECT DIE SPRINGS-LANSEHR500250 >
1/2" X 2" YELEX TRA HEAVY RECT DIE SPRINGS-LANSEHR500200 >
1/2" X 1-3/4" EXTRA HEAVY RECT DIE SPRINGS-LANSEHR500175 >
1/2" X 1-1/2" EXTRA HEAVY RECT DIE SPRINGS-LANSEHR500150 >
5/8" X 2" X/H OVAL DIE SPRINGS-LANSEHO625200>
1/2" X 1" YELEX TRA HEAVY RECT DIE SPRINGS-LANSEHR500100 >
2" X 2.5" XH YELLOW DIE SPRING-LANSEHR2000250>
1-1/2" X 3-1/2" XH RECT DIE SPRING-LANSEHR1500350>
1-1/2" X 2-1/2" EXTRA HEAVY RECT DIE SPRING-LANSEHR1500250 >
1-1/2" X 2" YEL XH RECT DIE SPRING-LANSEHR1500200>
1" X 6" YELLOWEX TRA HEAVY RECT DIE SPRINGS-LANSEHR1000600 >
1" X 5-1/2" X /H RECT DIE SPRINGS-LANSEHR1000550 >
1" X 5" X /H YELLOW DIE SPRINGS-LANSEHR1000500 >
1" X 4-1/2" X /H YELLOW DIE SPRINGS-LANSEHR1000450 >
1" X 4" X /H RECT DIE SPRINGS-LANSEHR1000400 >
1" X 3-1/2" X /H YELLOW DIE SPRINGS-LANSEHR1000350 >
1" X 3" X /H YELLOW DIE SPRINGS-LANSEHR1000300 >
1" X 2-1/2" X /H YELLOW DIE SPRINGS-LANSEHR1000250 >
1" X 2" X /H YELLOW DIE SPRINGS-LANSEHR1000200 >
1" X 1-3/4" X/H YELLOW DIE SPRINGS-LANSEHR1000175 >
1" X 1-1/2" X /H YELLOW DIE SPRINGS-LANSEHR1000150 >
Recently Viewed
5" LONG NOSE PLIER-RGL19600 >
EXTRA LONG/THIN NEEDLE NOSE PLIER-PROJ223G>-PROJ112G
GEARWRENCH® 82305 Punch and Chisel Set, Center/Cold/Long Taper/Pin/Starting Style, 1/4 to 5/8 in Chisel, 3/32 to 3/8 in Punch, 8 Punches, 4 Chisels, 12 Pieces
The GEARWRENCH 12-piece punch and chisel set includes: 4 cold chisels, a center punch, 4 pin punches, a long taper punch, and 2 starter punches ⏤ all the tools you need for a diverse range of professional work. The cold chisels are ideal for cutting metal rivets, bolts, and nuts. The pin punches are designed for final removal, like driving out pins and rivets. Use the center punch to mark center lines and pilot drill locations into metal. Install and remove pins and shafts with the long taper punch, or use the starter punch for starting and installing pins or rivets.
WATTS® 0063010 009 Inline Reduced Pressure Zone Assembly, 2 in Nominal, NPT End Style, Quarter-Turn Ball Valve, Bronze Body, Reduced Pressure Zone, 7.5 fps Flow Rate
Series 009 Reduced Pressure Zone Assemblies prevent the reverse flow of polluted water from entering into the potable water supply due to back siphon age and or backpressure. It consists of bronze body construction (1/4 to 2 in, 8 to 50 mm) or FDA approved epoxy coated cast iron (2-1/2 to 3 in, 65 to 80 mm), two, in-line independent check valves, replaceable check seats with an intermediate relief valve and ball valve test cocks. Series 009 is ideal for protection of health hazard cross-connections or for containment at the service line entrance. Check with local water authorities for installation requirements.
