79152CARPET TRIM 1-1/2" X 6' GOLD
CARPET TRIM 1-1/2" X 6' GOLD-M-D79152 >
Recently Viewed
CARPET TRIM 1-1/2" X 6' GOLD-M-D79152 >
Browning® 1078096 QD Bushing, 2-5/8 in Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Browning® 3207974 Type SH Q-D® Bushing, 25 mm Dia Bore, 1.871 in Dia Barrel, 2-11/16 in Dia Flange, 1.2 in OAL, Ductile Iron
Browning® 3207974 Type SH Q-D® Bushing, 25 mm Dia Bore, 1.871 in Dia Barrel, 2-11/16 in Dia Flange, 1.2 in OAL, Ductile Iron
Browning® 1078054 QD Bushing, 2-3/8 in Dia Bore, 2-13/16 in Dia Barrel, 3-7/8 in Dia Flange, 1-3/4 in OAL, Ductile Iron
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Weiler® 17682 Wheel Brush, 3-1/4 in Dia Brush, 3/8 in W Face, 0.02 in Dia Standard/Twist Knot Filament/Wire
Weiler® 17682 Wheel Brush, 3-1/4 in Dia Brush, 3/8 in W Face, 0.02 in Dia Standard/Twist Knot Filament/Wire
Square D™ 8910DPA33V09 3-Phase Electromechanical Type DPA Definite Purpose Contactor, 208/220/240 V AC V Coil, 30 A, 3NO Contact, 3 Poles
8910DP definite purpose magnetic contactors are designed for heating, air conditioning and refrigeration applications. This line of definite purpose contactors has current ratings up to 120 amperes resistive and 50 HP at 600 VAC. This three pole definite purpose contactor has a full load rating of 30 ampere and a resistive rating of 40 amperes. It also has a 2 HP at 115 VAC single phase, 5 HP at 230 VAC single phase and 10 HP at 230 VAC three phase, 15 HP at 460 VAC three phase and 20 HP at 575 VAC three phase. The nonreplaceable coil is available with a variety of coil voltages. This device has a 208/240 VAC 60 Hz, 220 VAC 50 Hz coil. The contactor has straight through wiring. Contactor is 3.75 inches by 2.37 inches and 3.00 tall. These contactors are UL component recognized and CSA certified.
