00745 MACKLANBURG-DUNCAN
100' CHALK REEL/CHALK COMBO-M-D00745 >
Recently Viewed
100' CHALK REEL/CHALK COMBO-M-D00745 >
The CBC-801 is a basic on-off power supply that provides full voltage to a 90 VAC clutch or brake and is activated by an external switch. This type of power supply is sufficient for many clutch/brake applications. These on-off controls (6001-448-004) feature 2 channels and an input of 120 VAC, 50/60 Hz.
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. The BMU bearings are commonly referred to as thrust bearings. These bearings have a 40 deg contact angle to accept heavy axial loads. The bearings have Universally Flush Ground rings to facilitate mounting in multiple bearing sets. The inner and outer rings have identical widths. These bearings can be mounted as DB, DF and DT pairs or can be combined into triplex and quadraplex sets. When two bearings are mounted together, a clearance or preload may be obtained without the use of shims or spacers. This bearing has a machined brass cage and is not available with seals or shields. These bearings are most commonly used in vertical pump and motor applications.
Precision Brand® 04030 Square Keystock, Steel, 1 ft L 8 mm W 8 mm H, Gold Dichromate Plated
Material is high quality, cold drawn steel. Gold dichromate plating makes product identification easy. Size is clearly marked on each piece. Precision Brand® metric keystock is used to accommodate metric keyways.
60-WATT G-25 GLOBE WHITE BULB-JWH518115 >
13 TOOTH SPROCKETS FOR #60 CHAIN
