SAIT 7" X 1/4" X 5/8"-11 GRIND/WHEELS SAI 20087
The United Abrasives/SAIT C24N Concrete wheel is excellent for grinding masonry, concrete, stone and aggregate. The C24N wheel can be used on hard to grind metal like cast iron and carbide. This wheel features a soft bond for fast stock removal. Proudly manufactured in the USA. Our unique Super-Lock™ Hub combines both a mechanical locking system and chemical bond providing one of the safest, vibration-free designs in the industry.
-
BrandUnited Abrasives-SAIT
-
UPC699053200873
-
Manufacturer Part Number20087
-
CountryUSA|Canada
-
Maximum Speed8500 rpm
-
ReinforcedYes
-
GradeCoarse
-
Grit24
-
Abrasive MaterialSilicon Carbide
-
Wheel Diameter7 in
-
Wheel HardnessN
-
Wheel Thickness1/4 in
-
Applicable MaterialsConcrete and Metal
-
Wheel Type NumberType 27
-
Specifications MetANSI B165.1, ANSI B165.2, ANSI Z87.1, OSHA 29CFR 1910.1200
-
Bond TypeResinoid
- All sizes reinforced with the highest quality fiberglass for maximum safety and performance
- Our unique Super-Lock™ hub combines both a mechanical locking system and chemical bond providing one of the safest, vibration-free designs in the industry
- Soft bond for fast stock removal
- Use the C24N wheel on hard to grind metal like cast iron and carbide
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 1AUF3 |
| Fastenal | 59314 |
-
UNSPSC31191600
-
Package Description10/BX
-
Standards/ApprovalsPROP65: You create dust when you cut, sand, drill or grind materials such as wood, paint, cement, masonry or metal. This dust often contains chemicals known to cause cancer, birth defects or other reproductive harm.
-
SDS
-
Specification Sheet
Recently Viewed
The United Abrasives/SAIT C24N Concrete wheel is excellent for grinding masonry, concrete, stone and aggregate. The C24N wheel can be used on hard to grind metal like cast iron and carbide. This wheel features a soft bond for fast stock removal. Proudly manufactured in the USA. Our unique Super-Lock™ Hub combines both a mechanical locking system and chemical bond providing one of the safest, vibration-free designs in the industry.
FYH® SAA209 28FP7 SAA Cylindrical Ball Bearing Insert, 1-3/4 in Dia Bore, 3.34 in OD, 1.72 in W, 34.1 kN Dynamic/21.3 kN Static Load
FYH® SAA209 28FP7 SAA Cylindrical Ball Bearing Insert, 1-3/4 in Dia Bore, 3.34 in OD, 1.72 in W, 34.1 kN Dynamic/21.3 kN Static Load
Milwaukee® TEMP-GUN™ 2278-20 Infrared Thermometer, -22 to 1022 deg F, +/-1.8 Accuracy, 12:1 Focus Spot, 0.95 Fixed, Li-Ion Battery
The Milwaukee infrared temp-gun delivers the clearest screen and faster scanning. With stunning readability indoor & outdoor, this infrared temp-gun provides easier readings for professional, residential, commercial and industrial users in any environment. Simple high/low alert setup makes scanning easier and faster. With a 7-point reinforced frame, fully bumpered nose, and shielded LCD, the Milwaukee infrared temp-gun survives 6 ft drops for superior durability.
Proto® J291R Locking Plier, 1-1/8 in, 1/2 in THK Straight Alloy Steel Jaw
1-1/2" X 1/2" STEEL BLACK BUSHINGS-JPW11/2X1/2FSBB>
The single-row angular contact ball bearing was designed to support radial, axial or composite loads, however, the axial load must be in one direction. The high thrust capacity is achieved by a higher shoulder on one side of the outer ring. The direction of the load through the balls forms the contact angle. The thrust capacity increases with the contact angle. The BMU bearings are commonly referred to as thrust bearings. These bearings have a 40 deg contact angle to accept heavy axial loads. The bearings have Universally Flush Ground rings to facilitate mounting in multiple bearing sets. The inner and outer rings have identical widths. These bearings can be mounted as DB, DF and DT pairs or can be combined into triplex and quadraplex sets. When two bearings are mounted together, a clearance or preload may be obtained without the use of shims or spacers. This bearing has a machined brass cage and is not available with seals or shields. These bearings are most commonly used in vertical pump and motor applications.
