Beam Clamp Anchor Clips
G-209-3/16 CROSBY 3/16" 3/10-TON SHACKLES
The Crosby G-209 3/16" is a high-quality screw pin anchor shackle manufactured by Kito Crosby. This industry-standard hardware piece is forged, quenched, and tempered from high-strength carbon steel, featuring a distinct alloy steel "Red Pin" for quick identity confirmation. It is specifically built for quick, temporary connections in dynamic overhead lifting, tie-down, towing, or suspension environments.
G-209-2-1/2 CROSBY MATERIAL HANDLING GROUP 2-1/2" 55-TON SHACKLES
The Crosby G-209 2-1/2" Screw Pin Anchor Shackle is a heavy-duty, forged steel rigging component with a 55-ton Working Load Limit
G-209-1/4 CROSBY1/4" 1/2-TON SP SHACKLES
The Crosby G-209 1/4" is a premium, high-strength screw pin anchor shackle designed for quick, temporary connections in tie-down, towing, suspension, or lifting applications. It features an industry-standard 0.5-ton (1,100 lbs) working load limit (WLL) and is instantly recognizable by Crosby's trademark Red Pin®
G-209-1/2 CROSBY1/2"2-TON SCREW-PIN SHACKLE
The Crosby G-209 1/2" is a hot-dip galvanized carbon steel screw pin anchor shackle featuring a 2-ton Working Load Limit (WLL) and a distinct Red Pin®. It is the industry standard for overhead lifting, towing, and everyday rigging applications.
G-209-1-3/8 CROSBY 1-3/8" 13.5-TON SHACKLES
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin®
G-209-1-3/4 CROSBY 1-3/4" 25-TON SHACKLES
The Crosby G-209 1-3/4" is a heavy-duty, galvanized carbon steel screw pin anchor shackle featuring a Working Load Limit (WLL) of 25 tons (55,000 lbs). Manufactured by Kito Crosby in the USA, this rigging component is widely considered the industry standard for demanding lifting, tie-down, and towing applications
G-209-1-1/8 CROSBY 1-1/8" 9.5-TON SCHACKLES
Crosby G-209 Screw Pin Anchor Shackles are the industry standard for everyday rigging, lifting, and towing applications. Forged, quenched & tempered from high-strength steel and equipped with an alloy pin, these Grade 6 shackles are proof-tested, fatigue rated, and built to perform under demanding field conditions. All G-209 shackles feature the Red Pin
G-209-1-1/4 CROSBY 1-1/4" 12-TON SHACKLES
Working Load Limit: 12 tons
Safety Factor: 6:1
Inside Width: 3.26"
Inside Height: 4.69"
Mouth Width: 2.03"
Shackle Size: 1-1/4"
Pin Size: 1-3/8"
Material: Carbon Steel Shackle
Alloy Pin
Finish: Galvanized
Type: Screw Pin Anchor
Product Weight: 9.5 lbs.
Standards: Meets or exceeds all requirements of ASME B30.26, Federal Specification RR-C-271, & ASTM A148M.
G-209-1-1/2 CROSBY1-1/2" 17-TON SHACKLES
The Crosby G-209 1-1/2" is a heavy-duty, hot-dip galvanized carbon steel screw pin anchor shackle featuring a 17-ton Working Load Limit (WLL) and Crosby's signature Red Pin®.
BAND-IT J307 2" X 5/8" GALVANIZED CLAMPS
JUNIOR 2" X 5/8" WIDE X 0.030" THICK, 2" DIAMETER
BAND-IT J306 1-3/4" X 5/8" GALVANIZED CLAMPS
PREFORMED JR SMOOTH ID CLAMP, 5/8" WIDE, 0.0300" THICK, 316 STAINLESS STEEL
10-82571 CROSBY 8.5-TON SHACKLE PINS
The CROSBY 1082571 is an 8.5-ton shackle pin designed for Crosby G4075 series slng shackles
Recently Viewed
Browning® offers a variety of bushing type sprockets available in single and double strands. Offerings include 35 to 160 pitch range. Bushed type bore ranges are available from 1/2 to 5 in. Hardened teeth are available up to 30 teeth.
1/8" -MALE PIPE THREADX3-1/2" GALVANIZED NIPPLE-FIT1/8X31/2GN >
Raider® Plus worm gear reducers represent the most flexible worm gear product in the power transmission solutions portfolio. With a large variety of add-on accessories, the Raider® Plus line of worm gear reducers is a problem solver. Four unit styles form the basis of this vast product offering. These are the universal style ("U" style, shaft input) with an output shaft and the C-face style ("Q" style, input quill) with an output shaft. Both the "U" and "Q" styles are also available with hollow outputs. The Raider® Plus worm gear reducer is designed as an industry interchange. It is dimensionally interchangeable with the major industry competitors.
7-AMP 600-VOLT AC TD FUSES
NO-FREEZE OVAL FOAM FAUCET COVER - JWH401234 >
Dichtomatik 75144041 O-Ring, 190 mm ID x 200 mm OD, FKM, 80 Shore A Durometer, Import
O-rings are endless, ring shaped sealing elements with a circular cross-section that are manufactured from elastomer materials or PTFE. The designation of an O-ring is derived from the dimensions of its inner diameter and cord width in millimeters, along with the name of the material and its Shore A hardness.
