Stanley 10-PC INCH COMBINATION WRENCH SETS STA ST-MT-74865
Stanley® STMT74865 Combination Wrench Set, 10 Pieces, 1/4 to 3/4 in, Polished Chrome
-
BrandStanley®
-
UPC076174748659
-
Manufacturer Part NumberSTMT74865
-
CountryUSA
-
FinishPolished Chrome
-
TypeCombination
-
Number of Pieces10
-
Size Range1/4 to 3/4 in
-
System of MeasurementImperial
- 12-point box end which prevents fastener damage and allows for higher torque
- Full polish chrome finish for corrosion resistance and clean ability
-
UNSPSC27111713
-
Standards/ApprovalsANSI Specified
Recently Viewed
Stanley® STMT74865 Combination Wrench Set, 10 Pieces, 1/4 to 3/4 in, Polished Chrome
3" X 96 ALUMINUM FLEXIBLE DUCTS. SEMI-RIGID. SOLD IN BULK-JWH270502 >
Leviton® 88003 Standard Size Wall Plate, 1 Gangs, 2-3/4 in W x 4-1/2 in H, Thermoset, White
Familiar and functional, Leviton® traditional wallplates are designed for use with traditional Leviton® devices. They represent styles and form factors that have stood the test of time. Their clean lines work in virtually any location, whether in new or retrofit construction and they install quickly and easily. Leviton® offers traditional wallplates in a vast array of colors and configurations.
McGill® 0007230000 MI Series Narrow Machined Separable Inner Ring With Oil Hole and Annular Groove, 4-1/2 in ID x 5.4985 in OD, 2.515 in OAW, For Use With GUIDEROL® GR 88 N, CAGEROL® MR 88 N Bearing, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
GSS Ground Pigtail With Green Slotted Hex Head Captive Screw, 12 AWG Solid Wire, 6-1/2 in L, Screw Terminal, Copper
Drillco 750A106 Spade Drill, 3/32 in Drill - Fraction, 0.0938 in Drill - Decimal Inch, 2XD D Cutting, Solid Carbide
Solid Carbide spade drills perform well in hard to machine materials (up to Rc 60), high strength alloys, plastic, and glass. They can be used in thin sheet metal and spotting applications. Drilling depth should not exceed 2x the drill diameter.
