Proto® J6064C C Series Micrometer Torque Wrench, 3/8 in Drive, 40 to 200 in-lb, Ratcheting Head, 1 in-lb Graduation, 11-7/8 in OAL, ASME B107.14M
Proto® J6064C C Series Micrometer Torque Wrench, 3/8 in Drive, 40 to 200 in-lb, Ratcheting Head, 1 in-lb Graduation, 11-7/8 in OAL, ASME B107.14M
-
BrandProto®
-
UPC662679136079
-
Manufacturer Part NumberJ6064C
-
CountryUSA|Canada
-
FinishFull Polished
-
MaterialSteel
-
Torque Range40 to 200 in-lb
-
Minimum Number of Cycles50000
-
Graduations1 in-lb
-
Accuracy+/-3% CW, +/-6% CCW
-
Rotation TypeCW/CCW
-
Handle TypeKnurled/Screw-On End Cap
-
Head TypeRatcheting
-
SeriesC Series
-
SettingAutomatic Reset
-
Indicator TypeAudible Click
-
Specifications MetASME B107.14M
-
Drive Size3/8 in
-
Overall Length11-7/8 in
- Calibrated to +/-4% in clockwise direction and +/-6% counter clockwise direction at 20% to 100% of full scale
- Calibration is accomplished by mechanical loading each wrench in a horizontal position and performing a three click test at 20%, 60% and 100% of maximum instrument capacity
- This Proto® torque wrench is made from high grade steel for strength and durability
- Thin head design to allow access in tight areas
- Calibrated To Plus or Minus 3% In Clockwise Direction And Plus Or Minus 6% In Counter Clockwise Direction
- For strength and durability
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | KP4220895 |
| Berkshire eSupply | KP4220895 |
| Berkshire eSupply | KP4220895 |
| Berkshire eSupply | KP4220895 |
-
UNSPSC27111715
-
Standards/ApprovalsASME B107.14M
Recently Viewed
Proto® J6064C C Series Micrometer Torque Wrench, 3/8 in Drive, 40 to 200 in-lb, Ratcheting Head, 1 in-lb Graduation, 11-7/8 in OAL, ASME B107.14M
Proto® J6064C C Series Micrometer Torque Wrench, 3/8 in Drive, 40 to 200 in-lb, Ratcheting Head, 1 in-lb Graduation, 11-7/8 in OAL, ASME B107.14M
Enerpac® GBJ020SA Hydraulic Bottle Jack, 22 ton Load, 7.48 in H Min, 13.78 in H Max, 4.13 in, 2.17 in L Screw
Enerpac® GBJ020SA Hydraulic Bottle Jack, 22 ton Load, 7.48 in H Min, 13.78 in H Max, 4.13 in, 2.17 in L Screw
Proto® J6062C C Series Micrometer Torque Wrench, 1/4 in Drive, 40 to 200 in-lb, Ratcheting Head, 1 in-lb Graduation, 11-7/8 in OAL, ASME B107.14M
Proto® J6062C C Series Micrometer Torque Wrench, 1/4 in Drive, 40 to 200 in-lb, Ratcheting Head, 1 in-lb Graduation, 11-7/8 in OAL, ASME B107.14M
Power Team® RH203 RH Series Center Hole Spring-Return Single-Acting Hydraulic Cylinder, 20 ton Load, 6-1/16 in H Min, 9-1/16 in H Max, 3 in
Power Team® RH203 RH Series Center Hole Spring-Return Single-Acting Hydraulic Cylinder, 20 ton Load, 6-1/16 in H Min, 9-1/16 in H Max, 3 in
Milwaukee® 48-25-5220 7-Piece Blade Replacement Kit, For Use With SwitchBlade™ 1-3/8 in Self-Feed Drill Bit
Keep all the tools to change your SWITCHBLADE™ in this handy, self-contained storage case. The SWITCHBLADE™ replacement kit includes three replacement blades, one feed screw, two set screws, and an integrated hex wrench. 1-3/8 in. SWITCHBLADE™ 3 blade replacement kit come with: (3) 1-3/8 in. SWITCHBLADE™ Selfeed bit blades, (1) feed screw, (2) set screws, built in hex wrench with storage case.
GEARWRENCH® 89118 Crowfoot Ratcheting Wrench Set, 11 Pieces, 3/8 to 1 in, Polished Chrome
The line of GEARWRENCH Ratcheting Crowfoot Wrenches provide improved access to nuts and bolts located in hard to reach places or confined spaces. By attaching an extension to this ratcheting wrench, you can avoid obstructions which limit access and would block a traditional ratchet, letting you can get the job done.
