P-2-BSD-115 Dodge® 066218 115 Special Duty Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 8-1/4 to 9-1/4 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 11 in OAL x 7.13 in OAH
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
-
BrandDodge®
-
UPC782475035724
-
Manufacturer Part Number066218
-
CountryUSA
-
Load Capacity8266 lb
-
Locking DeviceTapered Adapter Sleeve
-
FinishBlack Oxide
-
MaterialCast Iron
-
Maximum Speed2700 rpm
-
TypeSpecial Duty
-
Mounting TypeTwo-Bolt Base
-
Seal TypePiston Ring
-
Series115
-
Base Width3-1/2 in
-
Base to Bore Centerline3-1/4 in
-
Bolt Center-to-Center Length8-1/4 to 9-1/4 in
-
Bore Diameter1-15/16 in
-
Bore TypeTapered
-
Expansion TypeNon-Expansion (Fixed)
-
Overall Height7.13 in
-
Overall Length11 in
-
Overall Width4-1/4 in
- Capable of handling any combination of radial and thrust load
- Effective dual piston ring seals
- Adapter nut allows for easier installation and removal
- Elongated bolt holes
- Tapered roller assemblies
| Competitor Name | Cross-Reference Number |
|---|---|
| Applied Industrial Technologies | 100940670 |
-
Alternative Part NumberP2B-SD-115
-
UNSPSC31171511
-
Standards/ApprovalsUL Listed
-
Catalog
-
Line Drawing
-
Specification Sheet
-
Instruction/Installation Manual
Recently Viewed
P-2-BSD-115 Dodge® 066218 115 Special Duty Pillow Block Roller Bearing Unit, 1-15/16 in Dia Bore, 8-1/4 to 9-1/4 in L Bolt Center-to-Center, 3-1/4 in Base to Bore Centerline, 11 in OAL x 7.13 in OAH
Dodge® special duty double row tapered roller bearings have the highest capacity of all Dodge® tapered roller bearings. they carry heavy radial loads and combined radial and thrust loads. The maximum recommended load which can be applied is limited by various components in the system such as bearing, housing, shaft, shaft attachment, speed and life requirements. Dodge® special duty tapered roller bearings have been applied successfully even when these limits have been exceeded under controlled operating conditions.
Browning® 1225135 Minimum Plain Bore Type C1 Change Gear, 8 Diametral Pitch, 14.5 deg Pressure Angle, 1-1/4 in W Face, 29 Teeth, 3-5/8 in Dia Pitch, 1-3/8 in Dia Bore, Steel
Browning® offers a comprehensive line of off the shelf gears, including spur, miter and bevel as well as change gears. These are available in 20 deg pressure angle from 20 to 4 diametral pitch and 14.5 deg pressure angle from 48 to 3 diametral pitch. They are all designed to increase output, reduce costs and avoid the need for custom specials.
ISOSTATIC™ Century® 104233 Round Bore Sleeve Bearing, 3/4 in Dia Bore, 1 in OD, 1-1/2 in W
MORSE® 11467 1330 General Purpose Jobber Length Drill Bit, 21/64 in Drill - Fraction, 0.3281 in Drill - Decimal Inch, 118 deg Point, HSS, Black Oxide
