Proto® JH5-100FRB SAE Electronic Torque Wrench, 3/8 in Drive, 10 to 100 ft-lb, Fixed/Ratcheting Head, 0.01 ft-lb/0.1 in-lb Graduation, 20-1/2 in OAL, ASME B107.28
Proto® JH5-100FRB SAE Electronic Torque Wrench, 3/8 in Drive, 10 to 100 ft-lb, Fixed/Ratcheting Head, 0.01 ft-lb/0.1 in-lb Graduation, 20-1/2 in OAL, ASME B107.28
-
BrandProto®
-
UPC662679142964
-
Manufacturer Part NumberJH5-100FRB
-
CountryUSA|Canada
-
MaterialSteel
-
Power SourceAA Battery
-
Torque Range10 to 100 ft-lb
-
TypeSAE
-
Graduations0.01 ft-lb/0.1 in-lb
-
Accuracy+/-2 %
-
Rotation TypeCW/CCW
-
Handle TypeSteel Grip
-
Head TypeFixed/Ratcheting
-
SettingTrack Mode/Peak Hold/Auto Clear
-
Indicator TypeYellow/Green/Red Light/Audible Buzzer
-
Display TypeLCD
-
Specifications MetASME B107.28
-
Drive Size3/8 in
-
Overall Length20-1/2 in
- Accuracy of +/-2% of indicated value in both clockwise and counter clockwise directions
- Broad accuracy range extends from 10% of full scale to 100% of full scale to help reduce the number of torque wrenches required
- Ninety-nine in on-board in memory storage locations help improve efficiency when taking multiple torque readings
- Three units of measure are available, ft-lb, in-lb and N-m
- Three operating modes are track mode, peak hold and auto clear
- Fast sampling rate helps maintain high accuracy during torque applications
- Torque wrench head rotates to allow for easy viewing of LCD display
- Easy to read LCD display with large digits
- An audible buzzer helps identify when desired torque target zones are approaching and met
- Target torque zone is adjustable from 1 to 10% of targeted torque value
- Fixed ratcheting head features a robust 24 tooth design with 15 deg arc swing, alloy steel drive gear for strength and durability, low profile for easy access and a reversing lever design for quick, 1-handed operation
- Ergonomically designed, comfortable cushion grip
- 3-way red/green/yellow lights, yellow light appears at the low end of the zone, green light appears and buzzer sounds when the target is reached and red light appears with intermittent buzzer when it is over torqued
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 36WX47 |
| Grainger | 36WX47 |
-
UNSPSC27111715
-
Package DescriptionEACH
-
Standards/ApprovalsASME B107.28
Recently Viewed
Proto® JH5-100FRB SAE Electronic Torque Wrench, 3/8 in Drive, 10 to 100 ft-lb, Fixed/Ratcheting Head, 0.01 ft-lb/0.1 in-lb Graduation, 20-1/2 in OAL, ASME B107.28
Proto® JH5-100FRB SAE Electronic Torque Wrench, 3/8 in Drive, 10 to 100 ft-lb, Fixed/Ratcheting Head, 0.01 ft-lb/0.1 in-lb Graduation, 20-1/2 in OAL, ASME B107.28
Hougen® Copperhead™ 18002 Annular Cutter Kit, 9/16 in Dia Min Cutter, 1-1/16 in Dia Max Cutter, 2 in D Cutting, 9 Pieces, Carbide, Bright
Hougen® Copperhead™ 18002 Annular Cutter Kit, 9/16 in Dia Min Cutter, 1-1/16 in Dia Max Cutter, 2 in D Cutting, 9 Pieces, Carbide, Bright
Square D™ B150 Type B Rainproof Hub, 1-1/2 in, For Use With QO™/Homeline™ NEMA 3R Load Center, Safety Switch and RB Devices
Industrial Circuit Breaker Enclosures are designed to be tough, reliable and provide exceptional performance in the most grueling conditions. Provides a dead front housing for circuit breakers, molded case switches, and motor circuit protectors to prevent personnel from accidentally contacting energized parts. Designed to meet or exceed UL 50 requirements for specific environmental conditions. Allow breaker operation without removing cover. These units are UL Listed and CSA Certified. Square D equipment with “R’’ or “RB’’ suffix, designated NEMA 3R rainproof construction, utilizes bolt-on hubs listed below. “RB’’ devices will accept 3/4 in. through 2- 1/2 in. bolt-on hubs without the use of reducers. Off-center conduit thread openings and elongated mounting holes provide quick and easy adjustment to eliminate costly conduit offsets and bends. Load Center Hub, 1.50 in, rainproof, for RB devices is a conduit entry, and is used for conduit installation. This bolt-on accessory has a UL listed rating. The dimensions are 1.38 mm(H)4.44 mm(W)3.09 mm(D). This product comes with an 18 month warranty.
Gates® Power Transmission Tri-Power® BX31 Heavy Duty Molded Notch V-Belt, BX Section, 21/32 in W Top, 34 in L Outside, 13/32 in THK, EPDM
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
The Super Ball Bushing® bearing has been the industry standard for self-aligning linear bearings for over twenty years. This bearing provides three times the load capacity or 27 times the travel life of conventional linear bearings. Besides the dramatic increase in load capacity, the Super Ball Bushing® bearing is self-aligning, lightweight and adjustable with a low coefficient of friction. It is a quick and easy replacement for high friction plain bearings. The wear-resistant, engineered-polymer retainers and outer sleeves reduce inertia and noise in critical, high speed applications.
T-40 1/2" -DRIVE TORX DRIVER SOCKET -ARS12882 >
