GEARWRENCH® 85864 XL X-Beam™ Open End Combination Wrench, 3/4 in Wrench, 12 Points, 0/15 deg Offset, 12.01 in OAL, Polished Chrome
We designed the GEARWRENCH XL X-Beam™ wrenches to give you up to 500% more area for turning the wrench versus a standard wrench handle. The X-Beam™ allows you to apply force to the flat of the wrench, greatly reducing hand fatigue and pain. The XL X-Beam™ wrenches are 20% longer than our standard ratcheting combination wrenches, providing improved access and giving you the leverage to tighten or release the most stubborn fasteners. The ratcheting box end is designed to move fasteners with as little as 5°of motion, versus the 30° required for standard wrenches. The wrenches have strong alloy steel bodies with a bright, full polish chrome finish. The ratcheting box end also features our off-corner loading design that grips securely and reduces fastener rounding. The XL X-Beam is available in ratcheting combination, reversible ratcheting combination, and flex combination styles.
-
BrandGEARWRENCH®
-
UPC082171858642
-
Manufacturer Part Number85864
-
CountryUSA|Canada
-
Finish/CoatingPolished Chrome
-
Measurement SystemImperial
-
TypeOpen End
-
Handle TypeTwisted
-
Head Angle15 deg
-
SeriesXL X-Beam™
-
Wrench Opening3/4 in
-
Wrench TypeRatcheting
-
Number of Points12
-
Offset Angle0/15 deg
-
Open End Thickness0.37 in
-
Open End Width1.63 in
-
Overall Length12.01 in
-
Box End Thickness0.44 in
-
Box End Width1.34 in
- 72-tooth ratcheting box end needs a minimal 5 to move fasteners versus 30 for standard wrenches
- X-Beam design lets you apply force to the flat side of the wrench, reducing hand fatigue
- Longer beam provides greater access to confined work areas versus standard length wrenches
- Off-corner loading design on box end provides better grip and reduces fastener rounding
- One piece forged beam design with no weak spots for twisting
- Manufactured from alloy steel for better strength and longer tool life
- Bright, full polish chrome finish easily wipes clean and resists corrosion
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 6NJD9 |
| MSC | 79822508 |
| Fastenal | 0227586 |
-
UNSPSC27111713
-
Package DescriptionEACH
-
WarrantyLimited Lifetime
-
Specification Sheet
-
Catalog
Recently Viewed
GEARWRENCH® 85864 XL X-Beam™ Open End Combination Wrench, 3/4 in Wrench, 12 Points, 0/15 deg Offset, 12.01 in OAL, Polished Chrome
We designed the GEARWRENCH XL X-Beam™ wrenches to give you up to 500% more area for turning the wrench versus a standard wrench handle. The X-Beam™ allows you to apply force to the flat of the wrench, greatly reducing hand fatigue and pain. The XL X-Beam™ wrenches are 20% longer than our standard ratcheting combination wrenches, providing improved access and giving you the leverage to tighten or release the most stubborn fasteners. The ratcheting box end is designed to move fasteners with as little as 5°of motion, versus the 30° required for standard wrenches. The wrenches have strong alloy steel bodies with a bright, full polish chrome finish. The ratcheting box end also features our off-corner loading design that grips securely and reduces fastener rounding. The XL X-Beam is available in ratcheting combination, reversible ratcheting combination, and flex combination styles.
11 TOOTH SPROCKETS FOR #80 CHAIN-BRWH8011X11/4 >
Gates® Power Transmission MegaCrimp™ 8G-12FJX G25 Straight Hydraulic Coupling, 1/2 in x 1-1/16-12 Nominal, Hose x 37 deg Female JIC Flare Swivel, Carbon Steel
It’s what’s inside the MegaCrimp coupling that makes it perform so well, the “C” insert. This “C” insert allows usage with different hose constructions and wall thicknesses. In addition, the C-insert ensures an even distribution of crimping forces to form a concentric seal. That simplifies your inventory requirements since one size can accommodate many different hose ODs, on both one- and two-wire braid hoses and select Xpiral hoses. An additional bonus: MegaCrimp couplings are fully qualified for SAE, EN, and ISO performance.
BLACK #108 CRAYON HOLDER - MRK85400 >
Irwin® Unibit® 10502CB General Purpose Step Drill Set, Imperial, #3 Min Drill Bit, 3 Pieces, For Use With Metal Drilling, HSS/Cobalt, Uncoated
Irwin® Unibit® step drill bits are ideal for drilling holes in just about any type of thin material. General purpose high speed steel Unibit® step drill bits are perfect for use in mild steel, copper, brass, aluminum, plexiglass, wood and laminate. Our titanium nitride coated (TiN) bits resist heat and friction, which extends the life of the cutting edge six times longer than standard step drills. And, our cobalt step drill bits are engineered with M35 cobalt steel for maximum life when drilling in the toughest steel, including stainless steel. Most Unibit® step drills are designed with a SpeedPoint® tip that guarantees fast starts. They're manufactured with a single flute cutting edge that drills multiple sizes of true, round holes with precise step control. Plus, the hole sizes are permanently laser etched on the inside of the flute, so they can be easily identified throughout the life of the bit.
2 -FEMALE PIPE THREAD SCHEDULE 80 METAL BLACK CAP
