Proto Tools 15/16" 6-PT 1/2"-DR DEEP IMP/SKT PRO J-7330-H
Proto® TorquePlus™ J7330H Deep Length Socket, 1/2 in Square Drive, 15/16 in, 6 Points
-
BrandProto®
-
UPC662679340735
-
Manufacturer Part NumberJ7330H
-
CountryUSA|Canada
-
Locking TypeSide Locking Hole
-
FinishBlack Oxide
-
MaterialHigh Alloy Steel
-
Measurement SystemImperial
-
TypeDeep Length
-
Impact RatedYes
-
Number of Points6
-
Socket End Width1-3/8 in
-
Socket Size15/16 in
-
Opening Depth1-13/32 in
-
Drive End Width1-3/8 in
-
Drive Size1/2 in
-
Drive TypeSquare
-
Bolt Clearance Depth2-7/8 in
-
Overall Length3-1/2 in
- Proto® 6 point impact sockets are ideal for use on stubborn or damaged fasteners and also on fasteners made from soft materials
- The TorquePlus™ design is a high performance drive configuration which allows for quick and easy socket engagement to the fastener flats, not the corners
- The TorquePlus™ configuration employs a radius-corners design, shifting contact area and stress away from the fastener corners and distributing contact stresses over a large area of the socket, minimizing slippage
- Socket size stamped on tool for easy identification
- The TorquePlus™ internal design minimizes fastener rounding, helps to extend fastener life, and allows the user to more easily turn worn, rounded or rusted fasteners
- Specially heat treated for the correct balance of strength and durability
- Concentric openings
- Large clearance holes
- Tight nut end tolerances
- Made from high alloy steel for greater strength
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | KP4206080 |
-
UNSPSC27112828
-
Package Description6/BX
-
Standards/ApprovalsANSI B107.2|ASME B107.110-2012
-
WarrantyLimited Lifetime
Recently Viewed
Proto® TorquePlus™ J7330H Deep Length Socket, 1/2 in Square Drive, 15/16 in, 6 Points
Anvil® 0310089008 FIG 1125 Auxiliary Air Regulator Reducer, Coupling, 2 x 1-1/2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
S-FLEX COUPLING SLEEVES/INSERTS-TBW4JN>
3/8" -16" USS HEX RETHREAD DIE-DRI33E124C >
1-1/2" X 2-1/8" X .125 ARBOR SHIMS-PRC25459>
7/16" USS/NC GR-5 Zinc Hex Nuts
