Proto Tools 22-MM X 24-MM BOX END WRENCHES PRO J-1073-M
Proto® TorquePlus™ J1073M Box End Wrench, 22 x 24 mm Wrench, 12 Points, 7.5 deg Offset, 348.2 in OAL, Alloy Steel, Full Polished, ASME B107.100, AS954E S3.8.1
-
BrandProto®
-
UPC662679062248
-
Manufacturer Part NumberJ1073M
-
CountryUSA|Canada
-
Finish/CoatingFull Polished
-
MaterialAlloy Steel
-
Measurement SystemMetric
-
Wrench Opening22 x 24 mm
-
Wrench TypeDouble End, Offset
-
Number of Points12
-
Specifications MetASME B107.100, AS954E S3.8.1
-
Offset Angle7.5 deg
-
Overall Length348.2 in
-
Box End Thickness35/64 x 37/64 in
-
Box End Width34 x 32 mm
- Full polish finish provides corrosion resistance and easy-to-clean surfaces
- 12 point box end allow for fine indexing, helping to improve speed and access
- Offset box end allows access to recessed fasteners and keeps hands clear of obstructions
- Box ends incorporate the TorquePlus™ system
- Special alloy steel and heat treat permits thin box walls for strength and durability
- Thin narrow jaws for better access in limited space
- Modified square open end provides the strongest design with better fastener grip
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 4HJ11 |
-
UNSPSC27111705
-
Package DescriptionEACH
-
Standards/ApprovalsAS954E S3.8.1
Recently Viewed
Proto® TorquePlus™ J1073M Box End Wrench, 22 x 24 mm Wrench, 12 Points, 7.5 deg Offset, 348.2 in OAL, Alloy Steel, Full Polished, ASME B107.100, AS954E S3.8.1
BBI 643088 Fully Threaded Cap Screw, M10x1.5, 60 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
BBI 643088 Fully Threaded Cap Screw, M10x1.5, 60 mm L Under Head, 8.80 Grade, Medium Carbon Steel, Plain
Proto® J1200GASD11 Anti-Slip Combination Wrench Set, 11 Pieces, 1/4 to 15/16 in, Satin
Milwaukee® 48-27-0501 Heavy Duty Flat Boring Bit, 1/2 in Dia, 6-1/8 in OAL, Flat Flute, 1/4 in Shank
Bore small, clean holes at any angle in a variety of materials with the economical Milwaukee® 1/2 in. x 6 in. flat boring bit. This premium quality flat boring bit is made of heat-treated high carbon steel, so the drill point and cutting edge can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and Formica. This bit offers a 6 in. drilling depth but can be used with a 12 in. extension (48-28-3350) for extended deep-hole drilling. 3/16 in. shank diameter.
Dremel® 953 Grinding Stone, Taper Point, 3.2 mm Dia Shank
BBI 255061 Flat Washer, 3/8 in ID, Low Carbon Steel
